4 open source boards using the TPS62177DQC
Real designs built with the TPS62177DQC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
BMS
embeddedalpha
100 × 48 mm185 parts2LNo license6STM32
Falcon flight stick
hpvdt
76 × 51.5 mm55 parts4LNo license1STM32
PUEiE
Michal-Md
48.3 × 31.6 mm56 parts2LNo license0RP2040/RP2350
Kicker Board
RoboJackets
141 × 146.5 mm123 parts4LApache-2.032
The TPS62177DQC in open source designs
The gallery holds 4 open source boards using the TPS62177DQC from 4 GitHub repositories; a typical one measures about 88 × 49.8 mm and carries around 90 components.
50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Kicker Board by RoboJackets.
Microcontrollers on boards using the TPS62177DQC
What boards using the TPS62177DQC are built for
TPS62177DQC: common questions
Where can I find a TPS62177DQC reference design?
Each of the 4 boards on this page is a real design using the TPS62177DQC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS62177DQC use?
Most are built on STM32 (3) and RP2040/RP2350 (1).
How big is a typical board using the TPS62177DQC?
The median is 88 × 49.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS62177DQC?
By GitHub stars, Kicker Board by RoboJackets, with 32 stars.
Can I simulate one of these boards using the TPS62177DQC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.