USB2CAN Hardware

Mieho1·USB2CAN_Hardware·USB2CANv2/USB2CANv2.kicad_pcb

USB2CAN Hardware PCB layout, top view — open source STM32 board by Mieho1

About the USB2CAN Hardware PCB

USB2CAN Hardware is an open source STM32 PCB design by Mieho1, published on GitHub. It is a 4-layer board measuring 46.1 × 20.3 mm, with 56 components from 28 distinct parts.

Its main chip is the STM32F405RGTx, from the STM32 family. Other key parts include the MIC5528-3.3YMT-TR, USBLC6-2P6, MCP2561-E-SN and TLP175A. By type, the board carries 18 capacitors, 18 resistors, 7 ICs, 5 connectors, 4 diodes and 2 crystals.

Main components on the USB2CAN Hardware

USB2CAN Hardware bill of materials (BOM)

56 components, 28 distinct parts.

QtyPartRefs
1
MIC5528-3.3YMT-TR
IC1
1
STM32F405RGTx
U1
1
USBLC6-2P6
U2
2
MCP2561-E-SN
U3, U5
2
TLP175A
U4, U6
1
ABM3-16.000MHZ-B4Y-T
Y1
1
32KHz
Y2
1
USB_C_Receptacle_USB2.0
J1
1
Conn_01x06_Pin
J2
3
Conn_01x02_Pin
J3, J4, J5
1
SW_BOOT0
SW1
4
BUILTIN_LED
D1, D2, D3, D4
1
39n
L1
1
10u
C1
6
100n
C2, C3, C4, C5, C6, C10
1
10n
C7
2
1u
C8, C9
2
2.2u
C11, C12
2
2.2uF
C13, C14
4
22pF
C15, C16, C17, C18
Show 8 more
QtyPartRefs
1
10k
R1
2
5k1
R2, R4
1
1k5
R3
2
22
R5, R6
2
100
R7, R10
2
1k
R8, R9
4
510
R11, R12, R13, R14
4
0
R15, R16, R17, R18

USB2CAN Hardware design files

The KiCad project lives in the Mieho1/USB2CAN_Hardware repository on GitHub; these links point at the commit this page was built from.

USB2CAN Hardware: common questions

What microcontroller does the USB2CAN Hardware use?

The USB2CAN Hardware is built around the STM32F405RGTx, from the STM32 family.

How big is the USB2CAN Hardware PCB?

The USB2CAN Hardware measures 46.1 × 20.3 mm, has 4 copper layers and is 1.599978 mm thick.

How many components are on the USB2CAN Hardware?

56 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the USB2CAN Hardware design files?

From the Mieho1/USB2CAN_Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the USB2CAN Hardware design in my own project?

The repository has no license, so all rights stay with Mieho1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the USB2CAN Hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards