Pcb mod arduino
About the Pcb mod arduino
Pcb mod arduino is an open source AVR/Arduino PCB design by miguelitoVargas, published on GitHub. It is a 2-layer board measuring 116 × 100 mm, with 8 components from 8 distinct parts.
Its main chip is the Arduino_Mega2560_Shield, from the AVR/Arduino family.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
modulos tarjetas kicad
Pcb mod arduino bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | modulo 1 | Pin_Header_Straight_1x11_Pitch2.54mm | J1 |
| 1 | modulo 2 | Pin_Header_Straight_1x11_Pitch2.54mm | J2 |
| 1 | modulo 3 | Pin_Header_Straight_1x11_Pitch2.54mm | J3 |
| 1 | modulo 4 | Pin_Header_Straight_1x11_Pitch2.54mm | J4 |
| 1 | modulo 5 | Pin_Header_Straight_1x11_Pitch2.54mm | J5 |
| 1 | modulo 6 | Pin_Header_Straight_1x11_Pitch2.54mm | J6 |
| 1 | power | TerminalBlock_bornier-4_P5.08mm | J7 |
| 1 | Arduino_Mega2560_Shield | Arduino_Mega2560_Shield | XA1 |
Pcb mod arduino design files
The KiCad project lives in the miguelitoVargas/seqExplora repository on GitHub; these links point at the commit this page was built from.
Pcb mod arduino: common questions
What microcontroller does the Pcb mod arduino use?
The Pcb mod arduino is built around the Arduino_Mega2560_Shield, from the AVR/Arduino family.
How big is the Pcb mod arduino?
The Pcb mod arduino measures 116 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb mod arduino?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcb mod arduino design files?
From the miguelitoVargas/seqExplora repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pcb mod arduino design in my own project?
The repository has no license, so all rights stay with miguelitoVargas. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pcb mod arduino without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in seqExplora
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k