Pcb mod btn
About the Pcb mod btn
Pcb mod btn is an open source PCB design by miguelitoVargas, published on GitHub. It is a 2-layer board measuring 116 × 100 mm, with 51 components from 20 distinct parts.
By type, the board carries 30 connectors, 11 resistors and 10 capacitors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
modulos tarjetas kicad
Pcb mod btn bill of materials (BOM)
51 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | leds_1 | Pin_Header_Straight_1x04_Pitch2.54mm | J1, J2, J3, J4, J27 |
| 1 | btn_1 | Pin_Header_Straight_1x02_Pitch2.54mm | J5 |
| 1 | btn_2 | Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | ldes_2 | Pin_Header_Straight_1x04_Pitch2.54mm | J7 |
| 4 | leds_2 | Pin_Header_Straight_1x04_Pitch2.54mm | J8, J9, J10, J28 |
| 1 | led_3 | Pin_Header_Straight_1x04_Pitch2.54mm | J11 |
| 1 | btn_3 | Pin_Header_Straight_1x02_Pitch2.54mm | J12 |
| 5 | leds_4 | Pin_Header_Straight_1x04_Pitch2.54mm | J13, J14, J15, J16, J29 |
| 1 | btn_4 | Pin_Header_Straight_1x02_Pitch2.54mm | J17 |
| 5 | leds_5 | Pin_Header_Straight_1x04_Pitch2.54mm | J18, J19, J20, J21, J30 |
| 1 | btn_5 | Pin_Header_Straight_1x02_Pitch2.54mm | J22 |
| 1 | Pot_1 | Pin_Header_Straight_1x03_Pitch2.54mm | J23 |
| 1 | Pot_2 | Pin_Header_Straight_1x03_Pitch2.54mm | J24 |
| 1 | power | TerminalBlock_bornier-4_P5.08mm | J25 |
| 1 | main_controller | Pin_Header_Straight_1x11_Pitch2.54mm | J26 |
| 5 | CP | CP_Radial_D8.0mm_P5.00mm | C1, C2, C3, C4, C5 |
| 5 | 100nF | C_0805_HandSoldering | C6, C7, C8, C9, C10 |
| 5 | 10K | R_0805_HandSoldering | R1, R3, R5, R7, R9 |
| 5 | 1K | R_0805_HandSoldering | R2, R4, R6, R8, R10 |
| 1 | 240ohm | R_0805_HandSoldering | R11 |
Pcb mod btn design files
The KiCad project lives in the miguelitoVargas/seqExplora repository on GitHub; these links point at the commit this page was built from.
Pcb mod btn: common questions
How big is the Pcb mod btn?
The Pcb mod btn measures 116 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb mod btn?
51 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcb mod btn design files?
From the miguelitoVargas/seqExplora repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pcb mod btn design in my own project?
The repository has no license, so all rights stay with miguelitoVargas. Use it as a reference, and ask the author before reusing the design.
More boards in seqExplora
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979