Claude pcb mcp test

Mike-ferka·claude_pcb_mcp_test

Claude pcb mcp test layout, top view — open source board by Mike-ferka

About the Claude pcb mcp test

Claude pcb mcp test is an open source PCB design by Mike-ferka, published on GitHub. It is a 2-layer board measuring 40 × 30 mm, with 8 components from 7 distinct parts.

Other key parts include the AMS1117-3.3. By type, the board carries 3 resistors, 2 capacitors, 1 IC, 1 connector and 1 diode.

It belongs with the power & battery designs in this gallery.

From the project

PCB

You are designing a PCB in KiCad 10 using the KiCad MCP tools. Work in stages and STOP for my approval after each one.

PROJECT - Name / path: [name], [C:\path] - Purpose: [one paragraph on what the board does]

REQUIREMENTS - Input power: [e.g. 12V solar/battery, max current] - Rails: [e.g. 5V @ 1A, 3.3V @ 500mA] - MCU / main ICs: [e.g. ESP32-S3-WROOM-1, or "recommend one and justify it"] - Interfaces/connectors: [sensors, UART, I2C, antenna, headers] - Board constraints: [size in mm, layer count, mounting holes, enclosure] - Manufacturing: [e.g. JLCPCB, prefer basic parts, hand-solderable…

Main components on the Claude pcb mcp test

Claude pcb mcp test bill of materials (BOM)

8 components, 7 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
USB4125-GF-A-0190
USB-C Power
GCT
J1
1
PWR
D1
1
10uF
C1
1
22uF Tant
C2
2
5.1k
R1, R2
1
1k
R3

Claude pcb mcp test design files

The KiCad project lives in the Mike-ferka/claude_pcb_mcp_test repository on GitHub; these links point at the commit this page was built from.

Claude pcb mcp test: common questions

How big is the Claude pcb mcp test?

The Claude pcb mcp test measures 40 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Claude pcb mcp test?

8 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Claude pcb mcp test design files?

From the Mike-ferka/claude_pcb_mcp_test repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Claude pcb mcp test design in my own project?

The repository has no license, so all rights stay with Mike-ferka. Use it as a reference, and ask the author before reusing the design.

Similar boards