ESP32-Garage-Door-Controller

mikelawrence·ESP32-Garage-Door-Controller

ESP32-Garage-Door-Controller PCB layout, top view — open source ESP32 board by mikelawrence

About the ESP32-Garage-Door-Controller PCB

ESP32-Garage-Door-Controller is an open source ESP32 PCB design by mikelawrence, published on GitHub under the MIT license. It is a 2-layer board measuring 85 × 59 mm, with 24 components from 11 distinct parts.

Its main chip is the 5400, from the ESP32 family. By type, the board carries 12 resistors, 4 transistors, 2 connectors, 2 diodes, 2 capacitors and 1 module.

It belongs with the iot & wireless designs in this gallery.

From the project

ESP32 based garage door controller. There are a lot of ESPHome based garage door controller projects on the web. What makes this one unique is usined a rotary encoder to determine garage door position.

On a side note: Chamberlain recently stopped third party API access to MyQ which killed control for all sorts of home automation including Home Assistant. I realize that company's have the right to limit access and to control their ecosystem. But what Chamberlain did was close access to their API after many people bought their opener with third party access available. They also did this so that you will be forced to pay for access your garage door opener from your phone. There is no reason to buy a Chamberlain system when there are other systems that don't charge for access and have open…

ESP32-Garage-Door-Controller, from the project README
From the project README

Main components on the ESP32-Garage-Door-Controller

5400

ESP32-Garage-Door-Controller bill of materials (BOM)

24 components, 11 distinct parts.

QtyPartRefs
1
5400
Adafruit Feather ESP32 V2
Adafruit
A1
4
2N7002K
OnSemi
Q1, Q2, Q3, Q4
1
USB4135-GF-A
USB C Power Only
GCT
J1
1
1843664
Screw_Terminal_01x08
Phoenix Contact
J2
1
CPC1511Y
IXYS
RL1
2
TPD2E2U06DRLR
TPD2E2U06
TI
D1, D2
2
C0805C105K8RACTU
1uF
Kemet
C1, C2
5
RC0603JR-075K1L
5.1K
YAGEO
R1, R2, R3, R4, R5
1
RC0603JR-07680RL
680
YAGEO
R6
3
RC0603JR-074K7L
4.7K
YAGEO
R7, R8, R9
3
RC0603JR-07300RL
300
YAGEO
R10, R11, R12

ESP32-Garage-Door-Controller design files

The KiCad project lives in the mikelawrence/ESP32-Garage-Door-Controller repository on GitHub; these links point at the commit this page was built from.

ESP32-Garage-Door-Controller: common questions

What microcontroller does the ESP32-Garage-Door-Controller use?

The ESP32-Garage-Door-Controller is built around the 5400, from the ESP32 family.

How big is the ESP32-Garage-Door-Controller PCB?

The ESP32-Garage-Door-Controller measures 85 × 59 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-Garage-Door-Controller?

24 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32-Garage-Door-Controller design files?

From the mikelawrence/ESP32-Garage-Door-Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32-Garage-Door-Controller design in my own project?

Yes, under the terms of its MIT license, which mikelawrence chose for the repository.

Can I test firmware for the ESP32-Garage-Door-Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards