Status Strip
About the Status Strip PCB
Status Strip is an open source PCB design by mikesmitty, published on GitHub. It is a 2-layer board measuring 128.8 × 11 mm, with 15 components from 3 distinct parts.
By type, the board carries 7 diodes, 7 capacitors and 1 connector.
It belongs with the power & battery and iot & wireless designs in this gallery.
From the project
Six-port USB-C power supply: up to 100 W per port from one 24 V supply, with per-port control, priority-based power sharing and Home Assistant support.
A six-port USB-C power supply: up to 100 W per port from one 24 V supply, with per-port control, priority-based power sharing and Home Assistant support. This repository holds the hardware (KiCad), the firmware and the documentation site.
- First-time setup - User guide - Integrations: MQTT, Home Assistant and the HTTP API - Hardware architecture - Building the controller firmware and the charger blade firmware
Status Strip bill of materials (BOM)
15 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STATUS_LED | JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical | J1 |
| 7 | WS2812C-2020-V6 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1, D2, D3, D4, D5, D6, D7 |
| 7 | 100nF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7 |
Status Strip design files
The KiCad project lives in the mikesmitty/power-manifold repository on GitHub; these links point at the commit this page was built from.
Status Strip: common questions
How big is the Status Strip PCB?
The Status Strip measures 128.8 × 11 mm, has 2 copper layers and is 1.6062 mm thick.
How many components are on the Status Strip?
15 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Status Strip design files?
From the mikesmitty/power-manifold repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Status Strip design in my own project?
The repository has no license, so all rights stay with mikesmitty. Use it as a reference, and ask the author before reusing the design.
More boards in power-manifold
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k