HardLabs

Vm010-channelcontrol

mirdej·vmix·electronics/vm010-channelcontrol/vm010-channelcontrol.kicad_pcb

Vm010-channelcontrol PCB layout, top view — open source AVR/Arduino board by mirdej

About the Vm010-channelcontrol PCB

Vm010-channelcontrol is an open source AVR/Arduino PCB design by mirdej, published on GitHub. It is a 4-layer board measuring 30 × 181.5 mm, with 58 components from 22 distinct parts.

Its main chip is the ATmega1284P-MU, from the AVR/Arduino family. Other key parts include the AnymaISP, MAX5741 and ADR510. By type, the board carries 13 capacitors, 10 diodes, 9 switches, 8 resistors, 7 connectors and 4 ICs.

It belongs with the audio designs in this gallery.

From the project

Multichannel modular analog PAL video mixer based on the SYNKIE project

Multichannel modular analog PAL video mixer based on the SYNKIE project

The Anymix21 is a 12 channel analog video mixer based on the paradigm of classic audio mixing desks.

Each channel is a complete SYNKIE by itself, sort of. It can handle anything from DC to around 10Mhz, this means you can mix CV signals with audio with PAL composite video signals. Contrary to an audio mixer, inputs are DC coupled, with 0v being black and 0.7V white level. Negative levels are permitted but will be clipped at the final output stage.

Vm010-channelcontrol, from the project README
From the project README

Main components on the Vm010-channelcontrol

AnymaISPMAX5741ADR510ATmega1284P-MU

Vm010-channelcontrol bill of materials (BOM)

58 components, 22 distinct parts.

QtyPartRefs
1
AnymaISP
U1
1
MAX5741
U3
1
ADR510
U4
1
ATmega1284P-MU
U101
1
Crystal
Y1
1
to-eq
J1
1
Supply
J3
2
Conn_01x02
J4, J5
1
Conn_01x04
J6
1
Serial
J101
1
digitalbus
J102
4
R_POT
RV1, RV2, RV3, RV5
1
R_POT
RV4
9
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1
9
SK6812MINI
D1, D2, D3, D4, D5, D6, D7, D8 +1
1
LED
D101
1
Ferrite_Bead
FB101
1
10u
C1
10
100n
C2, C3, C4, C5, C101, C102, C103, C104 +2
2
10p
C6, C7
Show 2 more
QtyPartRefs
6
220
R1, R102, R103, R104, R105, R106
2
560
R2, R101

Vm010-channelcontrol design files

The KiCad project lives in the mirdej/vmix repository on GitHub; these links point at the commit this page was built from.

Vm010-channelcontrol: common questions

What microcontroller does the Vm010-channelcontrol use?

The Vm010-channelcontrol is built around the ATmega1284P-MU, from the AVR/Arduino family.

How big is the Vm010-channelcontrol PCB?

The Vm010-channelcontrol measures 30 × 181.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Vm010-channelcontrol?

58 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Vm010-channelcontrol design files?

From the mirdej/vmix repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Vm010-channelcontrol design in my own project?

The repository has no license, so all rights stay with mirdej. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Vm010-channelcontrol without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in vmix

Similar boards