Easypowerwall
mitchese·easypowerwall
About the Easypowerwall PCB
Easypowerwall is an open source PCB design by mitchese, published on GitHub. It is a 2-layer board measuring 260 × 260 mm, with 165 components from 4 distinct parts.
By type, the board carries 7 fuses and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
A PCB to make 18650 Battery packs easier to assemble and maintain
There are many projects which are building battery packs out of 18650 cells and fusable links. These projects all require massive amounts of labour to solder or weld the packs together. Once built, a dead cell in the pack requires much work to re-build the pack. This project will make an 18650 sandwich, with PCBs on either side taking care of the boring solder work. If a cell dies or the pack must be re-built, then four bolts hold it together and the cells are then replaceable.

Easypowerwall bill of materials (BOM)
165 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x14 | PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J2 |
| 156 | BatterySpring | batteryspring | B1, B2, B3, B4, B5, B6, B7, B8 +148 |
| 7 | Fuse | pcbfuse_4a | F1, F2, F3, F4, F5, F6, F7 |
Easypowerwall design files
The KiCad project lives in the mitchese/easypowerwall repository on GitHub; these links point at the commit this page was built from.
- Layouteasypowerwall.kicad_pcb
Easypowerwall: common questions
How big is the Easypowerwall PCB?
The Easypowerwall measures 260 × 260 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Easypowerwall?
165 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Easypowerwall design files?
From the mitchese/easypowerwall repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Easypowerwall design in my own project?
The repository has no license, so all rights stay with mitchese. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k