Opel power distribution monitor
MITEVT·opel_power_distribution_monitor·hardware/opel_pdm.kicad_pcb
About the Opel power distribution monitor PCB
Opel power distribution monitor is an open source PCB design by MITEVT, published on GitHub under the MIT license. It is a 2-layer board measuring 99.5 × 75 mm, with 67 components from 38 distinct parts.
Other key parts include the TCA9543A, LTC2943, MCP2551-I/SN, LPC11C14 and MCP1755-33. By type, the board carries 24 resistors, 12 capacitors, 8 diodes, 7 ICs and 4 connectors.
From the project
Power Distribution Monitor Module for MIT EVT's Opel GT
Main components on the Opel power distribution monitor
Opel power distribution monitor bill of materials (BOM)
67 components, 38 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCA9543A | SOIC-14_3.9x8.7mm_Pitch1.27mm | U6 |
| 2 | LTC2943 | DFN-8-1EP_3x3mm_Pitch0.5mm | U7, U8 |
| 1 | MCP2551-I/SN | MSOP-8_3x3mm_Pitch0.65mm | U401 |
| 1 | LPC11C14 | LQFP-48_7x7mm_Pitch0.5mm | U403 |
| 1 | MCP1755-33 | SOT-23-5 | U501 |
| 1 | MCP1755-5 | SOT-23-5 | U502 |
| 1 | CANCONNECTOR | 776280-1 | P001 |
| 1 | CONN_01X14 | 776267-1 | P002 |
| 1 | ISP | Connector_Microfit3_Header_02x03_Angled_43045-060x | P100 |
| 1 | DEBUG_LED | Connector_Microfit3_Header_02x08_Angled_43045-160x | P101 |
| 1 | SDA | smd_test_pad | W1 |
| 1 | SCL | smd_test_pad | W2 |
| 1 | SD0 | smd_test_pad | W3 |
| 1 | SC0 | smd_test_pad | W4 |
| 2 | SD1 | smd_test_pad | W5, W6 |
| 1 | CS+ | smd_test_pad | W7 |
| 1 | CS- | smd_test_pad | W8 |
| 1 | LV+ | smd_test_pad | W9 |
| 1 | LV- | smd_test_pad | W10 |
| 2 | TST_GND | SolderWirePad_2x_0-8mmDrill | W11, W12 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIO2_8 | R_0805_HandSoldering | D0 |
| 1 | PIO2_7 | R_0805_HandSoldering | D1 |
| 1 | PIO1_8 | R_0805_HandSoldering | D2 |
| 1 | PIO2_6 | R_0805_HandSoldering | D3 |
| 1 | PIO3_3 | R_0805_HandSoldering | D4 |
| 1 | PIO1_3 | R_0805_HandSoldering | D5 |
| 1 | PIO3_1 | R_0805_HandSoldering | D6 |
| 1 | PIO3_0 | R_0805_HandSoldering | D7 |
| 2 | 1uF | C_0603_HandSoldering | C1, C2 |
| 4 | 0.1uF | C_0603_HandSoldering | C3, C402, C405, C407 |
| 2 | 10uF | C_0805_HandSoldering | C401, C406 |
| 2 | 10μ | C_0805_HandSoldering | C501, C503 |
| 2 | .1μ | C_0603_HandSoldering | C502, C504 |
| 1 | 20k | R_0603_HandSoldering | R1 |
| 12 | 10k | R_0603_HandSoldering | R12, R13, R14, R15, R16, R17, R18, R19 +4 |
| 2 | 0.002 | R_2512_HandSoldering | R22, R23 |
| 1 | 120 | R_0603_HandSoldering | R201 |
| 8 | 100 | R_0603_HandSoldering | R301, R302, R303, R304, R305, R306, R307, R308 |
Opel power distribution monitor design files
The KiCad project lives in the MITEVT/opel_power_distribution_monitor repository on GitHub; these links point at the commit this page was built from.
Opel power distribution monitor: common questions
How big is the Opel power distribution monitor PCB?
The Opel power distribution monitor measures 99.5 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Opel power distribution monitor?
67 components, from 38 distinct parts. The full bill of materials is listed on this page.
Where can I download the Opel power distribution monitor design files?
From the MITEVT/opel_power_distribution_monitor repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Opel power distribution monitor design in my own project?
Yes, under the terms of its MIT license, which MITEVT chose for the repository.