10 open source boards using the LPC11C14
Real designs built with the LPC11C14, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
A123-battery integration
MITEVT
66 × 73.7 mm67 parts4LMIT2Final outline
MITEVT
99.5 × 75 mm57 parts2LMIT1Opel power distribution monitor
MITEVT
99.5 × 75 mm67 parts2LMIT0Opel battery science
MITEVT
66.3 × 54.9 mm58 parts2LNo license0Opel motor interface
MITEVT
99.5 × 75 mm43 parts2LMIT0Opel devboard
MITEVT
56.3 × 35.2 mm36 parts2LNo license0Opel velocity interface
MITEVT
132.1 × 57.2 mm39 parts2LMIT1Devboard panelized
MITEVT
201.9 × 148.6 mm35 parts2LNo license0Opel velocity interfaec
MITEVT
56.3 × 34.3 mm35 parts2LMIT1Final outline
MITEVT
99.5 × 75 mm31 parts2LNo license0
How designs wire the LPC11C14
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LPC11C14 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 3 has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ.
- Pin 4 has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ.
- Pin 5 is tied to GND on 6 of 6 designs.
- Pin 6 is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Not connected 50% · a signal 50% |
|
| Pin 2 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 3 | Connected to: A connector 83% |
|
| Pin 4 | Connected to: A connector 83% |
|
| Pin 5 | Connected to: GND 100% | — |
| Pin 6 | Connected to: Not connected 100% | — |
| Pin 7 | Connected to: Not connected 100% | — |
| Pin 8 | Connected to: 3.3V 100% |
|
| Pin 9 | Connected to: Not connected 50% · a signal 50% |
|
| Pin 10 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 11 | Connected to: Signal 83% · not connected 17% |
|
| Pin 12 | Connected to: Signal 83% · not connected 17% |
|
| Pin 13 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 15 | Connected to: Signal 67% · not connected 33% |
|
| Pin 16 | Connected to: Signal 67% · not connected 33% |
|
| Pin 18 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 21 | Connected to: Not connected 67% · a signal 33% |
|
| Pin 22 | Connected to: Not connected 50% · a signal 50% |
|
| Pin 23 | Connected to: Not connected 50% · a signal 50% |
|
| Pin 24 | Connected to: Not connected 67% · a signal 33% |
|
| Pin 26 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 29 | Connected to: Not connected 100% | — |
| Pin 30 | Connected to: Not connected 100% | — |
| Pin 33 | Connected to: Not connected 100% | — |
| Pin 34 | Connected to: Not connected 100% | — |
| Pin 35 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 36 | Connected to: Not connected 50% · a signal 50% |
|
| Pin 37 | Connected to: Signal 67% · not connected 33% |
|
| Pin 38 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 39 | Connected to: Signal 67% · not connected 33% |
|
| Pin 40 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 41 | Connected to: GND 100% | — |
| Pin 42 | Connected to: Not connected 100% | — |
| Pin 43 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 44 | Connected to: 3.3V 100% |
|
| Pin 45 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 48 | Connected to: Not connected 67% · a signal 33% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include A123-battery integration by MITEVT, Opel velocity interface by MITEVT, Devboard panelized by MITEVT and Opel battery science by MITEVT.
The LPC11C14 in open source designs
The gallery holds 10 open source boards using the LPC11C14 from 6 GitHub repositories; a typical one measures about 99.5 × 74.3 mm and carries around 41 components.
90% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is A123-battery integration by MITEVT.
Parts used alongside the LPC11C14
What boards using the LPC11C14 are built for
LPC11C14: common questions
Where can I find a LPC11C14 reference design?
Each of the 10 boards on this page is a real design using the LPC11C14. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the LPC11C14 pin 3?
Pin 3 has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the LPC11C14.
What pull-up resistor is used on the LPC11C14 pin 4?
Pin 4 has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the LPC11C14.
How is the LPC11C14 pin 5 connected?
Pin 5 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LPC11C14.
What parts are used alongside the LPC11C14?
The MCP2551-I-SN, MCP1755-33, MCP1755-5, MCP2515_TSSOP and MCP1755 appear in the most repositories here.
How big is a typical board using the LPC11C14?
The median is 99.5 × 74.3 mm, and 90% are two-layer designs.
What is the most popular open source board using the LPC11C14?
By GitHub stars, A123-battery integration by MITEVT, with 2 stars.
Can I simulate one of these boards using the LPC11C14 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.