4 open source boards using the MCP1755-33
Real designs built with the MCP1755-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Final outline
MITEVT
99.5 × 75 mm57 parts2LMIT1Opel power distribution monitor
MITEVT
99.5 × 75 mm67 parts2LMIT0Opel motor interface
MITEVT
99.5 × 75 mm43 parts2LMIT0Final outline
MITEVT
99.5 × 75 mm31 parts2LNo license0
The MCP1755-33 in open source designs
The gallery holds 4 open source boards using the MCP1755-33 from 4 GitHub repositories; a typical one measures about 99.5 × 75 mm and carries around 50 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Final outline by MITEVT.
Parts used alongside the MCP1755-33
What boards using the MCP1755-33 are built for
MCP1755-33: common questions
Where can I find a MCP1755-33 reference design?
Each of the 4 boards on this page is a real design using the MCP1755-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MCP1755-33?
The LPC11C14, MCP1755-5, MCP2551-I-SN and Zsr1000gta appear in the most repositories here.
How big is a typical board using the MCP1755-33?
The median is 99.5 × 75 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP1755-33?
By GitHub stars, Final outline by MITEVT, with 1 stars.
Can I simulate one of these boards using the MCP1755-33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.