BATPOWER04

mlab-modules·BATPOWER04·hw/sch_pcb/BATPOWER04.kicad_pcb

BATPOWER04 PCB layout, top view — open source board by mlab-modules

About the BATPOWER04 PCB

BATPOWER04 is an open source PCB design by mlab-modules, published on GitHub. It is a 2-layer board measuring 40.1 × 40.1 mm, with 26 components from 21 distinct parts.

Other key parts include the LM3485. By type, the board carries 9 connectors, 7 capacitors, 5 resistors, 2 diodes, 1 IC and 1 transistor.

It belongs with the power & battery designs in this gallery.

From the project

High-efficiency step-down converter based on the LM3485 PFET buck controller. Input voltage range is 4.5 V to 16 V. Output voltage can be selected by jumpers as 3.3 V or 5 V, or configured as a custom voltage using an external resistor.

BATPOWER04 is a step-down voltage converter module based on the LM3485 PFET buck controller. The input voltage range is 4.5 V to 16 V. The output voltage can be selected by jumpers as 3.3 V or 5 V, or configured as a custom voltage using an external resistor or trimmer. The output voltage range is 0.25 V to Vin.

The module is especially suited for battery-powered applications, but it can also be used as a step-down converter from an external 12 V supply to 3.3 V or 5 V for MLAB designs. Its key feature is high efficiency, up to 93%, which helps reduce waste heat.

BATPOWER04, from the project README
From the project README

Main components on the BATPOWER04

LM3485

BATPOWER04 bill of materials (BOM)

26 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM3485
U1
1
IRF7416
Q1
2
JUMP_4X2
J1, J9
2
CONN1_1
J2, J3
3
JUMP2_2X1
JUMP2_2x1
J4, J5, J6
1
Vout+
J7
1
Vout-
J8
1
M4
D1
1
15MQ040N
D2
1
22uH DE1207-22
L1
1
47UF
47uF
C1
1
100NF
100nF
C2
1
1NF
1nF
C3
1
100PF
100pF
C4
1
470PF
470pF
C5
2
100UF
100uF
C6, C7
1
22K
22k
R1
1
20K
20k
R2
1
33K
33k
R3
1
11K
11k
R4
Show 1 more
QtyPartRefs
1
-
R5

BATPOWER04 design files

The KiCad project lives in the mlab-modules/BATPOWER04 repository on GitHub; these links point at the commit this page was built from.

BATPOWER04: common questions

How big is the BATPOWER04 PCB?

The BATPOWER04 measures 40.1 × 40.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BATPOWER04?

26 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BATPOWER04 design files?

From the mlab-modules/BATPOWER04 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BATPOWER04 design in my own project?

The repository has no license, so all rights stay with mlab-modules. Use it as a reference, and ask the author before reusing the design.

Similar boards