SIPMPOWER01
mlab-modules·SIPMPOWER01·hw/sch_pcb/SIPMPOWER01.kicad_pcb
About the SIPMPOWER01 PCB
SIPMPOWER01 is an open source PCB design by mlab-modules, published on GitHub. It is a 2-layer board measuring 60.5 × 40.1 mm, with 33 components from 12 distinct parts.
By type, the board carries 9 connectors, 9 capacitors, 8 resistors and 3 battery holders.
It belongs with the power & battery designs in this gallery.
From the project
Batterry power module to obsolete SIPM01A Silicon photomultiplier module. Now is superseded by using the STEPUPDC02 voltage converter.

SIPMPOWER01 bill of materials (BOM)
33 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | HEADER_2x01_PARALLEL | Straight_2x01 | J1, J2, J3, J4, J5 |
| 1 | JUMP2_2X1 JUMP2_2x1 | Straight_1x02 | J6 |
| 3 | HEADER_2x01 | Straight_1x02 | J7, J8, J9 |
| 3 | BH23APC | BH23APC | BT1, BT2, BT3 |
| 4 | 3296W-10k | Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV3, RV4 |
| 1 | EMI_Filter_C | FIR_1806 | C1 |
| 1 | 470uF/50V - GT470/50 | CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | - | TantalC_SizeC_Reflow | C3 |
| 1 | 4U7/50V 4u7/50V | SMD-0805 | C4 |
| 5 | 100nF/50V | SMD-0805 | C5, C6, C7, C8, C9 |
| 4 | 4k7 | SMD-0805 | R1, R3, R5, R7 |
| 4 | 12k | SMD-0805 | R2, R4, R6, R8 |
SIPMPOWER01 design files
The KiCad project lives in the mlab-modules/SIPMPOWER01 repository on GitHub; these links point at the commit this page was built from.
SIPMPOWER01: common questions
How big is the SIPMPOWER01 PCB?
The SIPMPOWER01 measures 60.5 × 40.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SIPMPOWER01?
33 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SIPMPOWER01 design files?
From the mlab-modules/SIPMPOWER01 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SIPMPOWER01 design in my own project?
The repository has no license, so all rights stay with mlab-modules. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k