STM32 shield
About the STM32 shield
STM32 shield is an open source PCB design by mnk, published on GitHub. It is a 2-layer board measuring 52 × 53 mm, with 21 components from 12 distinct parts.
Other key parts include the TMP102XXDRL. By type, the board carries 7 connectors, 4 diodes, 3 capacitors, 2 resistors, 1 IC and 1 jumper.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Seminar om Embedded C Programming på STM32
På dette seminar vil vi sætte dig i gang med STM32. Vi ser på de værktøjer, du skal bruge for at komme i gang. Det hele er gratis, så det er bare med at komme i gang. Vi gennemgår alle basale hardwaredele, så du nemt kan komme videre. Der bliver nogle hands-on-opgaver, så tag din bærbare computer med.
Grafisk opsætning Debugger Seriel kommunikation (uart) SPI Timer ADC * USB (virtuel comport)
Main components on the STM32 shield
STM32 shield bill of materials (BOM)
21 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TMP102XXDRL TMP102xxDRL | SOT-563 | U1 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 2 | Neopixel | PinSocket_1x03_P2.54mm_Vertical | J5, J7 |
| 1 | PowerIn | PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical | J6 |
| 1 | JUMPER_2_OPEN Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 3 | 10K 10k | Potentiometer_Runtron_RM-065_Vertical | RV1, RV2, RV3 |
| 4 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4 |
| 3 | 100NF 100nF | C_0805_2012Metric | C1, C2, C3 |
| 2 | 10K 10k | R_0805_2012Metric | R1, R2 |
STM32 shield design files
The KiCad project lives in the mnk/IDASTM32HandOn repository on GitHub; these links point at the commit this page was built from.
STM32 shield: common questions
How big is the STM32 shield?
The STM32 shield measures 52 × 53 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32 shield?
21 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32 shield design files?
From the mnk/IDASTM32HandOn repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STM32 shield design in my own project?
The repository has no license, so all rights stay with mnk. Use it as a reference, and ask the author before reusing the design.
More boards in IDASTM32HandOn
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979