Power supply for breadboard
Mo-Kara·kicad-learning-projects·breadboard-power-supply/power supply for breadboard.kicad_pcb
About the Power supply for breadboard PCB
Power supply for breadboard is an open source PCB design by Mo-Kara, published on GitHub. It is a 2-layer board measuring 31 × 54.4 mm, with 17 components from 13 distinct parts.
Other key parts include the LM317_TO-220 and LM7805_TO220. By type, the board carries 7 connectors, 3 capacitors, 3 resistors, 2 ICs, 1 switch and 1 diode.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
KiCad practice boards recreated from public tutorials while learning PCB design
Practice boards I recreated in KiCad while learning schematic capture, footprints, PCB layout and fabrication output. These are learning projects: the designs were reproduced from public tutorials and open designs, not original work. The goal was to practise the workflow and to understand each circuit, not to claim the designs.

Main components on the Power supply for breadboard
Power supply for breadboard bill of materials (BOM)
17 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317_TO-220 | TO-220-3_Vertical | U1 |
| 1 | LM7805_TO220 | TO-220-3_Vertical | U2 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J2, J5 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J3, J7 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4, J6 |
| 1 | EG1218 | Switch_Slide_11.6x4mm_EG1218 | SW1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 10u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 1u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 0.1u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 2 | 330 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 560 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
Power supply for breadboard design files
The KiCad project lives in the Mo-Kara/kicad-learning-projects repository on GitHub; these links point at the commit this page was built from.
Power supply for breadboard: common questions
How big is the Power supply for breadboard PCB?
The Power supply for breadboard measures 31 × 54.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power supply for breadboard?
17 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power supply for breadboard design files?
From the Mo-Kara/kicad-learning-projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Power supply for breadboard design in my own project?
The repository has no license, so all rights stay with Mo-Kara. Use it as a reference, and ask the author before reusing the design.
More boards in kicad-learning-projects
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k