HardLabs

Modified sine inverter gwo pid

mofaa69·modified-sine-inverter-gwo-pid·pcb/m.kicad_pcb

Modified sine inverter gwo pid PCB layout, top view — open source AVR/Arduino board by mofaa69

About the Modified sine inverter gwo pid PCB

Modified sine inverter gwo pid is an open source AVR/Arduino PCB design by mofaa69, published on GitHub. It is a 2-layer board measuring 92.7 × 91.4 mm, with 30 components from 17 distinct parts.

Its main chip is the ATtiny85V-10P, from the AVR/Arduino family. Other key parts include the LM7812_TO220 and LM7805_TO220. By type, the board carries 8 resistors, 6 diodes, 5 capacitors, 4 transistors, 3 ICs and 2 switches.

From the project

TÜBİTAK 2209-A Destekli GWO-PID Kontrollü Modifiye Sinüs İnverter Tasarımı ve Uygulaması

Bu proje, TÜBİTAK 2209-A Üniversite Öğrencileri Araştırma Projeleri Destekleme Programı (Proje No: 1919B012454606) kapsamında Karadeniz Teknik Üniversitesi Elektrik-Elektronik Mühendisliği Bölümü'nde tamamlanmış lisans bitirme çalışmasıdır.

Çıkış geriliminin kararlılığını sağlamak için Arduino tabanlı bir PID denetleyici kurgulanmış; PID kontrolörün Kp ve Ki parametreleri metasezgisel bir sürü zekası algoritması olan Gri Kurt Optimizasyonu (GWO) ile optimize edilmiştir.

Modified sine inverter gwo pid, from the project README
From the project README

Main components on the Modified sine inverter gwo pid

ATtiny85V-10PLM7812_TO220LM7805_TO220

Modified sine inverter gwo pid bill of materials (BOM)

30 components, 17 distinct parts.

QtyPartRefs
1
ATtiny85V-10P
U1
1
LM7812_TO220
U3
1
LM7805_TO220
U4
4
IRLZ44N
Q1, Q2, Q3, Q4
1
Batarya
J1
1
C
100nF
2
IR2110
S1, S2
6
UF4007
D1, D2, D3, D4, D5, D6
1
2.2mF
C1
2
47uF
C2, C3
1
10uF
C4
1
C
C5
4
22R
R1, R2, R3, R4
1
100K
R2gate1
1
220R
R2gate2
1
4.7K
R5
1
22K
R6

Modified sine inverter gwo pid design files

The KiCad project lives in the mofaa69/modified-sine-inverter-gwo-pid repository on GitHub; these links point at the commit this page was built from.

Modified sine inverter gwo pid: common questions

What microcontroller does the Modified sine inverter gwo pid use?

The Modified sine inverter gwo pid is built around the ATtiny85V-10P, from the AVR/Arduino family.

How big is the Modified sine inverter gwo pid PCB?

The Modified sine inverter gwo pid measures 92.7 × 91.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Modified sine inverter gwo pid?

30 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Modified sine inverter gwo pid design files?

From the mofaa69/modified-sine-inverter-gwo-pid repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Modified sine inverter gwo pid design in my own project?

The repository has no license, so all rights stay with mofaa69. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Modified sine inverter gwo pid without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards