37 open source boards using the LM7812_TO220
Real designs built with the LM7812_TO220, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
BionX Minimal Translator
stancecoke
77.7 × 73.2 mm40 parts2LGPL-3.021Self-Tuning-SSTC
Firestorm108
100 × 93.7 mm44 parts2LNo license4STM32
STM32-FOC-Control
Gokasimov
100 × 100 mm118 parts4LMIT2AVR/Arduino
Goobylåda - Kretskort
DanielMartensson
100 × 100 mm99 parts2LMIT2- schematic only · 11 parts
ATX-Power-Supply-V2
Kazyaar-Faisal
11 partsNo license2 6809 Plus EPROM Version
roberto314
248.9 × 139.7 mm165 parts2LBSD-2-Clause1STM32
GaiForgeWeb-
GaiaForge
104.9 × 78 mm81 parts2LNo license1AVR/Arduino
Modified sine inverter gwo pid
mofaa69
92.7 × 91.4 mm30 parts2LNo license1RP2040/RP2350
Electronic-Speed-Controller
rhysyim
311 × 221.5 mm367 parts2LNo license0AVR/Arduino
Plc
PappasFlow
129 × 137.2 mm110 parts2LNo license0Mcc18
ZeniteSolar
199.1 × 127.5 mm65 parts2LGPL-3.00AVR/Arduino
Automated road marker
bytecod3
114.2 × 189.8 mm61 parts2LMIT0ESP32
Piezzo
ilkercosar
80 × 80 mm48 parts2LNo license0Void-SmartBot
amnxlab
130.5 × 133 mm42 parts4LNo license0AVR/Arduino
LatheDisplay
eshazen
85.7 × 63.5 mm36 parts2LNo license0Multi rail linear power supply
XAffanX
100 × 76.3 mm26 parts2LNo license0Cascaded variable linear power supply
reporafin
141.2 × 106.9 mm25 parts2LMIT0HFDRSSTC-Plasma-Flame-Generator-
Firestorm108
108 × 72.6 mm19 parts2LNo license0Kicad project3 -12V-Linear-Regulator using-LM7812
Shivasailanathan-helps
53.2 × 29.6 mm12 parts2LNo license0EProg (discrete part)
KALTCHUK
100.3 × 69.9 mm31 parts2LNo license94Ud29
profdc9
97.5 × 97.5 mm123 parts2LNo license56AVR/Arduino
Goobylåda - Kretskort - BACKUP
DanielMartensson
100 × 100 mm99 parts2LMIT2GIMIX 6809 CPU Plus
roberto314
248.9 × 139.7 mm165 parts2LBSD-2-Clause1Ud29
iduwhux
97.5 × 97.5 mm123 parts2LNo license1Raspberry Pi
PiDaughterBoard
mekatrol
191.5 × 116 mm165 parts2LNo license0Ud27c
profdc9
97.5 × 97.5 mm106 parts2LNo license56Ud27c
iduwhux
97.5 × 97.5 mm106 parts2LNo license1Convertor
bgerp
90.2 × 61 mm40 parts2LNo license0Synth psu 2
PurestSeaSalt
160 × 80 mm28 parts2LNo license0FUENTE SIMETRICA DE 12V
MyCloudExample
100 × 50 mm17 parts2LNo license1Cem3340-module
blthree
98.4 × 82.3 mm78 parts2LNo license0Blinds
bgerp
81.9 × 81.9 mm24 parts2LNo license0GIMIX Ghost 6800
roberto314
228.6 × 142.2 mm74 parts2LBSD-2-Clause1ControlledBlinds
bgerp
81.9 × 81.9 mm24 parts2LNo license0GIMIX intelligent 3 port Serial
roberto314
149.9 × 139.7 mm69 parts2LBSD-2-Clause1ModulinPowerSupply
ConDarth
25.4 × 177.8 mm18 parts2LNo license0
How designs wire the LM7812_TO220
Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the LM7812_TO220 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a capacitor to GND on 18 of 28 designs, most often 4.7 mF (then 10 µF).
- The VO pin has a decoupling capacitor on 13 of 28 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: Signal 54% · 24V 43% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VOpin 3 | Connected to: 12V 75% · a signal 25% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EProg (discrete part) by KALTCHUK, Ud27c by profdc9, BionX Minimal Translator by stancecoke and Self-Tuning-SSTC by Firestorm108.
The LM7812_TO220 in open source designs
The gallery holds 37 open source boards using the LM7812_TO220 from 29 GitHub repositories; a typical one measures about 100 × 97.5 mm and carries around 48 components.
94% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.
The most starred is EProg (discrete part) by KALTCHUK.
Parts used alongside the LM7812_TO220
Microcontrollers on boards using the LM7812_TO220
What boards using the LM7812_TO220 are built for
LM7812_TO220: common questions
Where can I find a LM7812_TO220 reference design?
Each of the 37 boards on this page is a real design using the LM7812_TO220. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM7812_TO220 VI pin connected?
The VI pin has a capacitor to GND on 18 of 28 designs, most often 4.7 mF (then 10 µF). Counted from the KiCad layouts of 28 open source designs using the LM7812_TO220.
What decoupling capacitors do designs use on the LM7812_TO220 VO pin?
The VO pin has a decoupling capacitor on 13 of 28 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 28 open source designs using the LM7812_TO220.
What parts are used alongside the LM7812_TO220?
The LM7805_TO220, LM7912_TO220, 74HC08, 74HC14 and 74HC74 appear in the most repositories here.
Which microcontrollers do boards using the LM7812_TO220 use?
Most are built on AVR/Arduino (6), STM32 (2), ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the LM7812_TO220?
The median is 100 × 97.5 mm, and 94% are two-layer designs.
What is the most popular open source board using the LM7812_TO220?
By GitHub stars, EProg (discrete part) by KALTCHUK, with 94 stars.
Can I simulate one of these boards using the LM7812_TO220 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.