SkyOrcaTX

mohamedaminemb·SkyOrca-Hardware·hardware/SkyOrcaTX/kicad/SkyOrcaTX.kicad_pcb

SkyOrcaTX PCB layout, top view — open source STM32 board by mohamedaminemb

About the SkyOrcaTX PCB

SkyOrcaTX is an open source STM32 PCB design by mohamedaminemb, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 50.2 × 34.6 mm, with 23 components from 21 distinct parts.

Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the TPS5430DDA. By type, the board carries 8 capacitors, 3 resistors, 2 ICs, 2 connectors, 2 diodes and 1 crystal.

It belongs with the robotics & motion designs in this gallery.

From the project

Custom quadcopter drone hardware — SkyOrcaFC, SkyOrcaTX, SkyOrcaRX

No Gerber zip is included in this release — contact the project team or generate from the KiCad project. Use the same JLCPCB 4-layer settings as SkyOrcaFC.

Main components on the SkyOrcaTX

SkyOrcaTX bill of materials (BOM)

23 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F405RGTX
ATmega328P-P
U1
1
TPS5430DDA
U7
1
8 MHZ
Y1
1
CONN_01X03_PIN
Conn_01x04_Pin
J5
1
CONN_01X03_PIN
Screw_Terminal_01x02
J6
1
SW_Push
SW1
1
Conn_01x02_Pin
UART1
2
Conn_01x10_Pin
UART3_XBEE1, UART3_XBEE2
1
MRBS340
D2
1
D_Schottky
D4
1
10 uH
L5
2
2.2UF
20pF
C1, C2
1
100 nF
C3
1
100nF
C4
1
100NF
100 nF
C5
1
560uF
C10
1
4.7 uF
C24
1
10NF
10nF
C25
1
10K
10 k
R3
1
10 K
R7
Show 1 more
QtyPartRefs
1
5.9 K
R8

SkyOrcaTX design files

The KiCad project lives in the mohamedaminemb/SkyOrca-Hardware repository on GitHub; these links point at the commit this page was built from.

SkyOrcaTX: common questions

What microcontroller does the SkyOrcaTX use?

The SkyOrcaTX is built around the STM32F405RGTX, from the STM32 family.

How big is the SkyOrcaTX PCB?

The SkyOrcaTX measures 50.2 × 34.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SkyOrcaTX?

23 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SkyOrcaTX design files?

From the mohamedaminemb/SkyOrca-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SkyOrcaTX design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which mohamedaminemb chose for the repository.

Can I test firmware for the SkyOrcaTX without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in SkyOrca-Hardware

Similar boards