Smd challenge
mokomull·smd-challenge
About the Smd challenge PCB
Smd challenge is an open source Microchip SAM PCB design by mokomull, published on GitHub. It is a 2-layer board measuring 41.3 × 31.8 mm, with 26 components from 21 distinct parts.
Its main chip is the ATSAMD21E15B-M, from the Microchip SAM family. Other key parts include the MIC5504-3.3YM5. By type, the board carries 9 resistors, 7 capacitors, 5 diodes, 2 ICs, 2 connectors and 1 crystal.
From the project
SMD circuit board with 1206, 0805, 0603, 0402 and 0201 LEDs
Main components on the Smd challenge
Smd challenge bill of materials (BOM)
26 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIC5504-3.3YM5 | SOT-23-5 | U1 |
| 1 | ATSAMD21E15B-M | QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U2 |
| 1 | ECS-160-18-33QZ-ADS-TR | Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | DX07S016JA1R1500 | JAE_DX07S016JA1R1500 | J1 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | RED | LED_1206_3216Metric | D1 |
| 1 | ORANGE | LED_0805_2012Metric | D2 |
| 1 | YELLOW | LED_0603_1608Metric | D3 |
| 1 | GREEN | LED_0402_1005Metric | D4 |
| 1 | BLUE | LED_0201_0603Metric | D5 |
| 2 | 10u | C_1206_3216Metric | C1, C4 |
| 2 | 28p | C_0603_1608Metric | C2, C3 |
| 3 | 100n | C_0603_1608Metric | C5, C6, C7 |
| 2 | 5k1 | R_0603_1608Metric | R1, R2 |
| 1 | 10k | R_0603_1608Metric | R3 |
| 1 | 260 | R_1206_3216Metric | R4 |
| 1 | 240 | R_0805_2012Metric | R5 |
| 1 | 260 | R_0603_1608Metric | R6 |
| 1 | 130 | R_0402_1005Metric | R7 |
| 1 | 80 | R_0201_0603Metric | R8 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k | R_0603_1608Metric | R9 |
Smd challenge design files
The KiCad project lives in the mokomull/smd-challenge repository on GitHub; these links point at the commit this page was built from.
- Layoutsmd-challenge.kicad_pcb
- Schematicsmd-challenge.kicad_sch
- BOMbom.csv
Smd challenge: common questions
What microcontroller does the Smd challenge use?
The Smd challenge is built around the ATSAMD21E15B-M, from the Microchip SAM family.
How big is the Smd challenge PCB?
The Smd challenge measures 41.3 × 31.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smd challenge?
26 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Smd challenge design files?
From the mokomull/smd-challenge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Smd challenge design in my own project?
The repository has no license, so all rights stay with mokomull. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smd challenge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416