HardLabs

AIPCB

Momozavur·AIPCB

AIPCB PCB layout, top view — open source board by Momozavur

About the AIPCB PCB

AIPCB is an open source PCB design by Momozavur, published on GitHub. It is a 2-layer board measuring 38 × 38 mm, with 7 components from 6 distinct parts.

Other key parts include the L7805CV and MCP6273-E/P. By type, the board carries 3 capacitors, 2 ICs and 2 resistors.

It belongs with the audio designs in this gallery.

From the project

Open Simple5V.kicadpro in KiCad 10. The project contains the complete schematic and a 38 × 38 mm routed PCB. Seven electronic components; six direct-solder wire terminals. No custom symbols or footprint libraries.

Open Simple5V.kicadpro in KiCad 10. The project contains the complete schematic and a 38 × 38 mm routed PCB. Seven electronic components; six direct-solder wire terminals. No custom symbols or footprint libraries.

- J1: +8–9 V DC input. J2: input ground. Use a regulated DC source and correct polarity. - J3: approximately +5 V output, up to 50 mA external load at room temperature without a heatsink. J4: common ground. - J5: signal input, referenced to common ground. J6: buffered output. Connect the signal source ground to J2/J4. - Recommended signal range 0.1–4.5 V, DC or low-frequency…

Main components on the AIPCB

L7805CVMCP6273-E/P

AIPCB bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
L7805CV
U1
1
MCP6273-E/P
U2
1
470nF 25V X7R
C1
2
100nF 25V X7R
C2, C3
1
820R 1% 0.25W
R1
1
100R 1% 0.25W
R2

AIPCB design files

The KiCad project lives in the Momozavur/AIPCB repository on GitHub; these links point at the commit this page was built from.

AIPCB: common questions

How big is the AIPCB PCB?

The AIPCB measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AIPCB?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the AIPCB design files?

From the Momozavur/AIPCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AIPCB design in my own project?

The repository has no license, so all rights stay with Momozavur. Use it as a reference, and ask the author before reusing the design.

Similar boards