31 open source boards using the L7805CV
Real designs built with the L7805CV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Rti
cceh
100 × 80 mm54 parts2LNo license15Oxikit-Brainboard
shridattdudhat
100 × 100 mm67 parts2LGPL-3.012Accumulator Board
formulaslug
127 × 91.5 mm102 parts2LNo license5PIC
1005-Flash-Programmer
wilsondr9999
88.3 × 54.6 mm31 parts4LAGPL-3.02Arpeggiator
EwoudVV
220 × 170 mm350 parts2LNo license1- schematic only · 33 partsRP2040/RP2350
Pico pilot
DusterTheFirst
33 partsGPL-3.01 RP2040/RP2350
Analog matrix 4x4
tim4431
160 × 170 mm428 parts4LNo license0Controller
aykutozdemir
100 × 100 mm102 parts2LNo license0RP2040/RP2350
Wireless Slave
magnusbpt
62 × 57 mm85 parts2LNo license0STM32
DynamicSystemsAndControl
almondsun
99 × 99 mm57 parts2LNo license0Kamikazii
choicebuilds
75 × 49 mm55 parts4LNo license0MFOS Wall-Wart PSU (Eurorack)
ckarcz
80 × 100 mm46 parts2LMIT0Circuito-Disparo-Laser-CO2
FernandoVB01
100 × 70 mm45 parts2LMIT0AVR/Arduino
SumoBot v1
choicebuilds
88 × 60 mm33 parts4LNo license0ESP32
Etapa2 amplificador esp32
a-bobadilla
55 × 42 mm27 parts2LNo license0ESP32
StealTheMoon
choicebuilds
130 × 130 mm22 parts4LNo license0Task1-Linear-Voltage-Regulator
Assane401
145 × 45 mm8 parts2LNo license0AIPCB
Momozavur
38 × 38 mm7 parts2LNo license0- schematic only · 697 parts
Master
plektra
697 parts2LCustom license0 - schematic only · 58 partsAVR/Arduino
Voltmeter
wolly981
58 partsNo license0 ESP32
Shack Relay Matrix rev C: shack interface
PE1RGU
160 × 161 mm265 parts4LCERN-OHL-S-2.02AC Clock Generator and Digit Reset Circuit
martinbros
111.8 × 50.8 mm30 parts2LGPL-3.02RP2040/RP2350
Analog matrix 4x4 3d
tim4431
160 × 170 mm428 parts4LNo license0AVR/Arduino
Modbus master
magnusbpt
104 × 129 mm77 parts2LNo license0Retro stack power clock
gcoonrod
99.1 × 99.1 mm48 parts2LApache-2.00AVR/Arduino
Node
aetas
41 × 44 mm14 parts2LMIT3RP2040/RP2350
Analog matrix lc1
tim4431
160 × 170 mm387 parts4LNo license0Cvbs effects
ckarcz
44.5 × 39.5 mm25 parts2LMIT0- schematic only · 29 parts
Cvbs decomposer
ckarcz
29 parts2LMIT0 ESP8266
Rgbw 12v controller
SmartHome-yourself
95.8 × 62.2 mm21 parts2LGPL-2.06AVR/Arduino
Slippi
RoboJackets
78.7 × 34.9 mm42 parts2LMIT9
How designs wire the L7805CV
Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the L7805CV connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 5V on 20 of 23 designs (a signal on 3).
- The IN pin is tied to 12V on 17 of 23 designs (a signal on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 12V 74% · a signal 26% | — |
| GNDpin 2 | Connected to: GND 91% | — |
| OUTpin 3 | Connected to: 5V 87% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rti by cceh, Oxikit-Brainboard by shridattdudhat, Slippi by RoboJackets and Rgbw 12v controller by SmartHome-yourself.
The L7805CV in open source designs
The gallery holds 31 open source boards using the L7805CV from 26 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 48 components.
72% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is Rti by cceh.
Parts used alongside the L7805CV
Microcontrollers on boards using the L7805CV
What boards using the L7805CV are built for
L7805CV: common questions
Where can I find a L7805CV reference design?
Each of the 31 boards on this page is a real design using the L7805CV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L7805CV OUT pin connected?
The OUT pin is tied to 5V on 20 of 23 designs (a signal on 3). Counted from the KiCad layouts of 23 open source designs using the L7805CV.
How is the L7805CV IN pin connected?
The IN pin is tied to 12V on 17 of 23 designs (a signal on 6). Counted from the KiCad layouts of 23 open source designs using the L7805CV.
What parts are used alongside the L7805CV?
The DRV8871DDAR, Pico, ROB-14450 and TMUX6219DGKR appear in the most repositories here.
Which microcontrollers do boards using the L7805CV use?
Most are built on AVR/Arduino (6), RP2040/RP2350 (5), ESP32 (3) and ESP8266 (1).
How big is a typical board using the L7805CV?
The median is 100 × 80 mm, and 72% are two-layer designs.
What is the most popular open source board using the L7805CV?
By GitHub stars, Rti by cceh, with 15 stars.
Can I simulate one of these boards using the L7805CV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.