Monotech xt cf mini
About the Monotech xt cf mini PCB
Monotech xt cf mini is an open source PCB design by monotech, published on GitHub under the GPL-3.0 license. It is a board measuring 81.3 × 51.6 mm, with 27 components from 18 distinct parts.
Other key parts include the 28C64, 74LS688, 74LS32 and 74LS04. By type, the board carries 8 capacitors, 6 resistors, 5 ICs, 4 switches, 2 connectors and 1 diode.
From the project
Miniature 8-bit ISA CompactFlash Interface + Boot ROM
Monotech XT-CF-Mini Rev1.1 ReadMe ----------------------------
8-bit ISA CompactFlash interface + Boot ROM (two separate functions that can be used individually).
Documentation for the switches can be found on the rear silkscreen. More ROM I/O addresses are possible than the information on the silkscreen. See below.
Credit: ------- Design uses schematic from Sergey Kiselev, with a few small changes to switches, and PCB from scratch.\ www.malinov.com/Home/sergeys-projects/xt-cf-lite
Main components on the Monotech xt cf mini
Monotech xt cf mini bill of materials (BOM)
27 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 28C64 | DIP-28_W15.24mm_Socket | U1 |
| 2 | 74LS688 | SOIC-20W_7.5x12.8mm_P1.27mm | U2, U3 |
| 1 | 74LS32 | SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | 74LS04 | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | CF_CARD | CF_Slot_3M_N7E50-7516TS0884 | P1 |
| 1 | IDE LED | PinHeader_1x02_P2.54mm_Horizontal | P2 |
| 1 | BUSPC_DEV | ISA-8BIT-XT-CF | BUS1 |
| 1 | ROM Enable | CKCOMP-OS102011MA1QN1 | SW1 |
| 1 | ROM Write Enable | CKCOMP-OS102011MA1QN1 | SW2 |
| 1 | ROM Addr | SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mm | SW3 |
| 1 | IDE Addr | SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mm | SW4 |
| 1 | IDE LED | LED_D3.0mm | D1 |
| 6 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 2 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7, C8 |
| 1 | 5.6k | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 10K | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 3 | 10K | R_Array_Convex_4x1206 | RN1, RN2, RN3 |
| 1 | 1K | R_Array_Convex_4x1206 | RN4 |
Monotech xt cf mini design files
The KiCad project lives in the monotech/monotech_xt-cf-mini repository on GitHub; these links point at the commit this page was built from.
- Layoutxt-cf-mini.kicad_pcb
Monotech xt cf mini: common questions
How big is the Monotech xt cf mini PCB?
The Monotech xt cf mini measures 81.3 × 51.6 mm and is 1.6002 mm thick.
How many components are on the Monotech xt cf mini?
27 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Monotech xt cf mini design files?
From the monotech/monotech_xt-cf-mini repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Monotech xt cf mini design in my own project?
Yes, under the terms of its GPL-3.0 license, which monotech chose for the repository.