2023-2024-4GP-BriereRome-Clair
MOSH-Insa-Toulouse·2023-2024-4GP-BriereRome-Clair·Shield/Shield.kicad_pcb
About the 2023-2024-4GP-BriereRome-Clair PCB
2023-2024-4GP-BriereRome-Clair is an open source PCB design by MOSH-Insa-Toulouse, published on GitHub. It is a 2-layer board measuring 68.6 × 55.8 mm, with 25 components from 18 distinct parts.
Other key parts include the MCP41100 and ltc1050acn8. By type, the board carries 8 resistors, 4 connectors, 4 capacitors, 2 ICs, 1 battery holder and 1 LED.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Projet Capteur de Jules et Gabriel
Afin de mesurer la flexion de notre capteur graphite nous mesurons sa resistance. Cependant, sa resitance étant très grande, le signal à mesurer est très faible. Nous utilisons donc un amplificateur pour augmenter le signal et qu'il soit ainsi mesurable. Nous utilisons ensuite une carte arduino uno pour mesurer ce signal et le transmettre via bluetooth à une application mobile. Nous utilisons aussi des boutons et un afficheur OLED afin de changer la valeur d'un potententiomètre digital qui module le gain de l'amplificateur.

Main components on the 2023-2024-4GP-BriereRome-Clair
2023-2024-4GP-BriereRome-Clair bill of materials (BOM)
25 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP41100 | MCP41100 | U1 |
| 1 | ltc1050acn8 LTC1050ACN8_PBF | LTC1050 | U2 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | ~ | HT-05 | BT1 |
| 3 | ~ | Bouton | Bouton1, Bouton2, Bouton3 |
| 1 | ~ | Flex_Sensor | Flex_sensor1 |
| 1 | ~ | Capteur_GR | GR1 |
| 1 | ~ | OLED | OLED1 |
| 3 | 100n | CP_Radial_Tantal_D4.5mm_P5.00mm | C1, C2, C3 |
| 1 | 1µ | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C4 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 3 | ~ | Res_debout | R2, R4, R8 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
2023-2024-4GP-BriereRome-Clair design files
The KiCad project lives in the MOSH-Insa-Toulouse/2023-2024-4GP-BriereRome-Clair repository on GitHub; these links point at the commit this page was built from.
- LayoutShield/Shield.kicad_pcb
- SchematicShield/Shield.kicad_sch
2023-2024-4GP-BriereRome-Clair: common questions
How big is the 2023-2024-4GP-BriereRome-Clair PCB?
The 2023-2024-4GP-BriereRome-Clair measures 68.6 × 55.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2023-2024-4GP-BriereRome-Clair?
25 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the 2023-2024-4GP-BriereRome-Clair design files?
From the MOSH-Insa-Toulouse/2023-2024-4GP-BriereRome-Clair repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 2023-2024-4GP-BriereRome-Clair design in my own project?
The repository has no license, so all rights stay with MOSH-Insa-Toulouse. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979