10 open source boards using the MCP41100

Real designs built with the MCP41100, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the MCP41100

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP41100 connects to, and the resistors, capacitors and other passives placed on it.

VSSpin 4Connected to: GND 100%
VDDpin 8Connected to: 5V 86%

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 2023-2024-4GP-BriereRome-Clair by MOSH-Insa-Toulouse, PSX64 Adapter by Commodore-Bench, 2023 2024 mini project Junjiang Thang Stephane by JunjiangGuo and Enc panel by mar0x.

The MCP41100 in open source designs

The gallery holds 10 open source boards using the MCP41100 from 7 GitHub repositories; a typical one measures about 68.6 × 55.3 mm and carries around 22 components.

100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is 2023-2024-4GP-BriereRome-Clair by MOSH-Insa-Toulouse.

Parts used alongside the MCP41100

Microcontrollers on boards using the MCP41100

MCP41100: common questions

Where can I find a MCP41100 reference design?

Each of the 10 boards on this page is a real design using the MCP41100. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MCP41100 use?

Most are built on AVR/Arduino (4).

How big is a typical board using the MCP41100?

The median is 68.6 × 55.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCP41100?

By GitHub stars, 2023-2024-4GP-BriereRome-Clair by MOSH-Insa-Toulouse, with 1 stars.

Can I simulate one of these boards using the MCP41100 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part