HardLabs

RN2483shield

MOSH-Insa-Toulouse·RODIER-XU-ZHANG·GazSensor-Rodier&Xu/RN2483shield-master/RN2483shield.kicad_pcb

RN2483shield PCB layout, top view — open source AVR/Arduino board by MOSH-Insa-Toulouse

About the RN2483shield PCB

RN2483shield is an open source AVR/Arduino PCB design by MOSH-Insa-Toulouse, published on GitHub. It is a 2-layer board measuring 68.9 × 53.6 mm, with 8 components from 5 distinct parts.

Its main chip is the ARDUINO_SHIELD, from the AVR/Arduino family. Other key parts include the RN2483. By type, the board carries 6 connectors and 1 IC.

It belongs with the dev boards & breakouts and sensors designs in this gallery.

From the project

Gas sensor arduino shield

Main components on the RN2483shield

RN2483

RN2483shield bill of materials (BOM)

8 components, 5 distinct parts.

QtyPartRefs
1
RN2483
U1
1
SCREW_TERMINAL
J1
2
SMA
J2, J3
3
CONN_01X06
P1, P2, P3
1
ARDUINO_SHIELD
SHIELD1

RN2483shield design files

The KiCad project lives in the MOSH-Insa-Toulouse/RODIER-XU-ZHANG repository on GitHub; these links point at the commit this page was built from.

RN2483shield: common questions

What microcontroller does the RN2483shield use?

The RN2483shield is built around the ARDUINO_SHIELD, from the AVR/Arduino family.

How big is the RN2483shield PCB?

The RN2483shield measures 68.9 × 53.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RN2483shield?

8 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the RN2483shield design files?

From the MOSH-Insa-Toulouse/RODIER-XU-ZHANG repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the RN2483shield design in my own project?

The repository has no license, so all rights stay with MOSH-Insa-Toulouse. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RN2483shield without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in RODIER-XU-ZHANG

Similar boards