Mbc1 SRAM typeA 1-1

MouseBiteLabs·Game-Boy-Cartridges·MBC1 (Type A, SRAM)/mbc1_SRAM_typeA_1-1.kicad_pcb

Mbc1 SRAM typeA 1-1 PCB layout, top view — open source board by MouseBiteLabs

About the Mbc1 SRAM typeA 1-1 PCB

Mbc1 SRAM typeA 1-1 is an open source PCB design by MouseBiteLabs, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 53 × 62 mm, with 29 components from 15 distinct parts.

Other key parts include the M29F160N, MBC1, 62256, MM1134/MM1026 and TPS3613. By type, the board carries 9 capacitors, 9 resistors, 5 ICs, 2 transistors and 1 connector.

It belongs with the retro computing designs in this gallery.

From the project

A collection of my Game Boy cartridge circuit board designs

This is an updated design of my flashable MBC1-based cartridge for the Game Boy. The MBC1 mapper was used in many of the earlier Game Boy games, such as the Super Mario Land series, the Donkey Kong Land series, Metroid II, and one of my personal favorites - the original Link's Awakening.

This MBC1 cartridge uses brand new M29F160 EEPROM chips and battery-backed SRAM.

Mbc1 SRAM typeA 1-1, from the project README — From the project README

Main components on the Mbc1 SRAM typeA 1-1

M29F160NMBC162256MM1134/MM1026TPS3613

Mbc1 SRAM typeA 1-1 bill of materials (BOM)

29 components, 15 distinct parts.

Qty	Part	Footprint	Refs
1	M29F160N	TSOP-I-48_18.4x12mm_P0.5mm	U1
1	MBC1	SO24	U2
1	62256	SO28	U3
1	MM1134/MM1026	SOIC-8_3.9x4.9mm_P1.27mm	U4
1	TPS3613	MSOP-10_3x3mm_P0.5mm	U5
2	2N7002	SOT-23	Q1, Q2
1	GBC_CARTTAB	GBC_CART_TABBED	P1
1	CR2025	CR2025	B1
2	SJ	SJ	SJ3, SJ4
5	0.1uF	C_0603_1608Metric_Boxed	C1, C4, C5, C7, C8
1	10uF	C_0603_1608Metric_Boxed	C6
3	0.001uF	C_0603_1608Metric_Boxed	C9, C10, C11
7	10k	R_0603_1608Metric_Boxed	R1, R3, R4, R5, R6, R7, R8
1	130k	R_0603_1608Metric_Boxed	R9
1	49.9k	R_0603_1608Metric_Boxed	R10

Mbc1 SRAM typeA 1-1 design files

The KiCad project lives in the MouseBiteLabs/Game-Boy-Cartridges repository on GitHub; these links point at the commit this page was built from.

Mbc1 SRAM typeA 1-1: common questions

How big is the Mbc1 SRAM typeA 1-1 PCB?

The Mbc1 SRAM typeA 1-1 measures 53 × 62 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mbc1 SRAM typeA 1-1?

29 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mbc1 SRAM typeA 1-1 design files?

From the MouseBiteLabs/Game-Boy-Cartridges repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mbc1 SRAM typeA 1-1 design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which MouseBiteLabs chose for the repository.

More boards in Game-Boy-Cartridges

Similar boards