53 open source boards using the 62256

Real designs built with the 62256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

53 boardsClear filters|Most starred

How designs wire the 62256

Read from the KiCad layouts of 36 open source designs, one per repository: what each pin of the 62256 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 27 of 36 designs, most often 100 nF (then 1 µF).
GNDpin 14Connected to: GND 97%
VCCpin 28Connected to: 5V 86%
  • Decoupling capacitor on 75% · 100 nF (36), 1 µF (4), 10 µF (1)

26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 512k by homebrew8088, 65C02 Computer by dbuchwald, Abn6502 by AndersBNielsen and Minimax8085 by skiselev.

The 62256 in open source designs

The gallery holds 53 open source boards using the 62256 from 36 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 47 components.

94% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is 512k by homebrew8088.

Microcontrollers on boards using the 62256

62256: common questions

Where can I find a 62256 reference design?

Each of the 53 boards on this page is a real design using the 62256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 62256 VCC pin?

The VCC pin has a decoupling capacitor on 27 of 36 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 36 open source designs using the 62256.

What parts are used alongside the 62256?

The 28C256, 74HC00, 74HC74, 74HC21 and 74LS138 appear in the most repositories here.

Which microcontrollers do boards using the 62256 use?

Most are built on AVR/Arduino (3) and ESP32 (1).

How big is a typical board using the 62256?

The median is 160 × 100 mm, and 94% are two-layer designs.

What is the most popular open source board using the 62256?

By GitHub stars, 512k by homebrew8088, with 238 stars.

Can I simulate one of these boards using the 62256 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part