Link adapter 1-3
MouseBiteLabs·Super-Game-Boy-Plus·Link Adapter PCB/link_adapter_1-3.kicad_pcb
About the Link adapter 1-3 PCB
Link adapter 1-3 is an open source PCB design by MouseBiteLabs, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 15.4 × 23 mm, with 3 components from 2 distinct parts.
It belongs with the retro computing designs in this gallery.
From the project
A replacement circuit board for improving the Super Game Boy, or for creating a standalone Game Boy game for the SNES.
Use this board to center the link port properly in SNES shells that aren't the SGB2.
NOTE: This only works on the North American Super Game Boy shell. It will not fit in a Super Famicom or PAL region SGB.
The zipped folder contains all the gerber files for this board. The board characteristics don't really matter a whole lot, but I would err on the thicker side for support purposes.
Link adapter 1-3 bill of materials (BOM)
3 components, 2 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 2 | LINKPORTCGB-LINK | GameBoy_LinkPort_MGB_Horizontal | P1, P2 |
Link adapter 1-3 design files
The KiCad project lives in the MouseBiteLabs/Super-Game-Boy-Plus repository on GitHub; these links point at the commit this page was built from.
Link adapter 1-3: common questions
How big is the Link adapter 1-3 PCB?
The Link adapter 1-3 measures 15.4 × 23 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Link adapter 1-3?
3 components, from 2 distinct parts. The full bill of materials is listed on this page.
Where can I download the Link adapter 1-3 design files?
From the MouseBiteLabs/Super-Game-Boy-Plus repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Link adapter 1-3 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which MouseBiteLabs chose for the repository.
More boards in Super-Game-Boy-Plus
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k