F1c200s dev board
About the F1c200s dev board
F1c200s dev board is an open source PCB design by Mr-Bossman, published on GitHub. It is a 2-layer board measuring 62 × 46 mm, with 58 components from 27 distinct parts.
Other key parts include the 3.3v, F1C100s, XC6421AB03ER-G and AT25xxx. By type, the board carries 22 capacitors, 15 connectors, 13 resistors, 4 ICs, 2 diodes and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A custom development board for an soc
"# f1c200s-dev-board usb otg needs to be fixed and sdcard locaton and flash pad size and 3.3 requlators pad is rotated"
Main components on the F1c200s dev board
F1c200s dev board bill of materials (BOM)
58 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3.3v | SOT-23 | U1 |
| 1 | F1C100s | F1C100s | U2 |
| 1 | XC6421AB03ER-G | XC6421AB03ER-G | U3 |
| 1 | AT25xxx | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | 24MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | Conn_02x14_Odd_Even | PinHeader_2x14_P2.54mm_Vertical | J1 |
| 2 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J2, J6 |
| 1 | Conn_01x07_Male | PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 2 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J7, J10 |
| 3 | Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | J8, J13, J14 |
| 1 | Conn_01x01_Male | PinHeader_1x01_P2.54mm_Vertical | J9 |
| 2 | 105162-0001 | 105162-0001 | J11, J15 |
| 1 | 10118194-0011LF | 101181940011LF | J12 |
| 1 | SW_Push | button | SW1 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 6 | .1u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C20, C21, C22 |
| 14 | 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C5, C6, C7, C8, C9, C10, C11 +6 |
| 2 | 22p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C15, C16 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 22R | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3 |
| 2 | 2.2K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5 |
| 2 | 100 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R8 |
| 1 | 47K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 3.3K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9 |
| 1 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10 |
| 3 | 220k | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R12, R13 |
F1c200s dev board design files
The KiCad project lives in the Mr-Bossman/f1c200s-dev-board repository on GitHub; these links point at the commit this page was built from.
- Layoutf1c200s.kicad_pcb
F1c200s dev board: common questions
How big is the F1c200s dev board?
The F1c200s dev board measures 62 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the F1c200s dev board?
58 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the F1c200s dev board design files?
From the Mr-Bossman/f1c200s-dev-board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the F1c200s dev board design in my own project?
The repository has no license, so all rights stay with Mr-Bossman. Use it as a reference, and ask the author before reusing the design.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979