Hp dl380 fan controller
mschaf·hp_dl380_fan_controller·hardware/fan_controller/fan_controller.kicad_pcb
About the Hp dl380 fan controller PCB
Hp dl380 fan controller is an open source PIC PCB design by mschaf, published on GitHub. It is a 2-layer board measuring 100 × 35 mm, with 62 components from 20 distinct parts.
Its main chip is the PIC24FJ128GB204, from the PIC family. Other key parts include the LM317_3PinPackage. By type, the board carries 29 resistors, 22 capacitors, 4 connectors, 3 diodes, 2 ICs and 1 crystal.
From the project
A fan controller for my DL380e gen8, should work with similar servers as well. It takes the fan signal from the mainboard and divides it by 2, expect it is over 70% then it just passed it as it is.
A fan controller for my DL380e gen8, should work with similar servers as well. It takes the fan signal from the mainboard and divides it by 2, expect it is over 70% then it just passed it as it is.
It gets its power and commands from the internal USB port of the server. It acts like a serial device and can be configured via the serial console.
Firmware for the PIC microcontroller is written with MPLAB X in c. The PCB layout is made in KiCAD and can be ordered from services like JLCPCB with the files from the gerbers directory.

Main components on the Hp dl380 fan controller
Hp dl380 fan controller bill of materials (BOM)
62 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC24FJ128GB204 | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | LM317_3PinPackage | SOT-223-3_TabPin2 | U2 |
| 1 | 8 MHz | smd_quarz | Y1 |
| 2 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J1, J2 |
| 1 | ICSP | PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | USB_B_Micro | USB_BWM | J4 |
| 1 | Jumper_NC_Dual | PinSocket_1x03_P2.54mm_Vertical | JP1 |
| 3 | LED_Dual_AACC | EVL 15-22 R6G6C | D1, D2, D3 |
| 2 | 10u | C_1206_3216Metric | C1, C17 |
| 12 | 100n | C_0805_2012Metric | C2, C3, C4, C5, C6, C7, C8, C9 +4 |
| 2 | 15p | C_0805_2012Metric | C14, C15 |
| 1 | CP | CP_Elec_4x5.4 | C16 |
| 1 | 1u | C_0805_2012Metric | C18 |
| 4 | C_Small | C_0805_2012Metric | C19, C20, C21, C22 |
| 13 | 10k | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R11 +5 |
| 7 | 100 | R_0805_2012Metric | R8, R9, R10, R17, R18, R19, R20 |
| 1 | 100K | R_0805_2012Metric | R21 |
| 1 | 390 | R_0805_2012Metric | R22 |
| 6 | 470 | R_0805_2012Metric | R23, R24, R25, R26, R27, R28 |
| 1 | 240 | R_0805_2012Metric | R29 |
Hp dl380 fan controller design files
The KiCad project lives in the mschaf/hp_dl380_fan_controller repository on GitHub; these links point at the commit this page was built from.
Hp dl380 fan controller: common questions
What microcontroller does the Hp dl380 fan controller use?
The Hp dl380 fan controller is built around the PIC24FJ128GB204, from the PIC family.
How big is the Hp dl380 fan controller PCB?
The Hp dl380 fan controller measures 100 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hp dl380 fan controller?
62 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hp dl380 fan controller design files?
From the mschaf/hp_dl380_fan_controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Hp dl380 fan controller design in my own project?
The repository has no license, so all rights stay with mschaf. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hp dl380 fan controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379