Ublox dan usb dongle
About the Ublox dan usb dongle PCB
Ublox dan usb dongle is an open source PCB design by MTalon63, published on GitHub under the Custom license license. It is a 6-layer board measuring 43.5 × 22 mm, with 26 components from 18 distinct parts.
Other key parts include the USBLC6-2SC6, CH340N, MIC5365-3.3YC5 and DAN-F10N. By type, the board carries 9 capacitors, 4 ICs, 4 connectors, 4 resistors, 3 diodes and 1 battery holder.
From the project
Misc. PCB designs
Main components on the Ublox dan usb dongle
Ublox dan usb dongle bill of materials (BOM)
26 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6_Handsoldering | U1 |
| 1 | CH340N | JEITA_SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MIC5365-3.3YC5 | SOT-353_SC-70-5 | U3 |
| 1 | DAN-F10N | DAN-F10N | U4 |
| 2 | USB_A | USB_A_Molex_48037-2200_Horizontal | J1, J2 |
| 1 | U.Fl | U.FL_Molex_MCRF_73412-0110_Vertical | J3 |
| 1 | EXT | PinSocket_1x05_P1.27mm_Vertical | J4 |
| 1 | ML414H | ML414H_IV01E | BT1 |
| 1 | PMEG4005EJ | D_SOD-323F | D1 |
| 1 | Red 859-LTST-S220KRKT | LED_0805_2012Metric | D2 |
| 1 | Grrer 859-LTST-S220GKT | LED_0805_2012Metric | D3 |
| 1 | 27nH | L_0603_1608Metric | L1 |
| 3 | 4.7u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6, C7 |
| 6 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5, C8, C9 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
Ublox dan usb dongle design files
The KiCad project lives in the MTalon63/PCBs repository on GitHub; these links point at the commit this page was built from.
Ublox dan usb dongle: common questions
How big is the Ublox dan usb dongle PCB?
The Ublox dan usb dongle measures 43.5 × 22 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Ublox dan usb dongle?
26 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ublox dan usb dongle design files?
From the MTalon63/PCBs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ublox dan usb dongle design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in PCBs
ESP32Ws2812-matrix
100 × 100 mm290 parts4LCustom license2
Bpsk modulator
66.5 × 42 mm62 parts2LCustom license2
ESP32Fan control
50 × 50 mm56 parts6LCustom license2
ESP32Esp32s3wroom devboard
29 × 46.7 mm27 parts2LCustom license2
Adl5606-breakout
36.6 × 13.9 mm18 parts6LCustom license2
Sx1255-breakout
31 × 30 mm17 parts6LCustom license2
Neo tracker hat
40 × 40 mm14 parts4LCustom license2
Pi attenuator panel
18.2 × 5.5 mm8 parts2LCustom license2
Smd tht adapter
86.4 × 92 mm4 parts2LCustom license2
Panel
86.4 × 92 mm4 parts2LCustom license2
AT0603T-breakout panel
17.1 × 5 mm3 parts2LCustom license2