Neo tracker hat
About the Neo tracker hat
Neo tracker hat is an open source PCB design by MTalon63, published on GitHub under the Custom license license. It is a 4-layer board measuring 40 × 40 mm, with 14 components from 14 distinct parts.
Other key parts include the MAX-M10S, SSM6L56FE,LM, NC7WZ07P6X and 317990687. By type, the board carries 6 connectors, 4 ICs, 2 resistors, 1 inductor and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Misc. PCB designs
Main components on the Neo tracker hat
Neo tracker hat bill of materials (BOM)
14 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX-M10S | ublox_MAX | U1 |
| 1 | SSM6L56FE,LM | SOTFL50P160X60-6N | U2 |
| 1 | NC7WZ07P6X | SOT65P210X110-6N | U3 |
| 1 | 317990687 Wio-E5 | 317990687 | U4 |
| 1 | GPIO | PinSocket_2x12_P2.54mm_Vertical | J1 |
| 1 | AUDIO | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | USB | PinSocket_1x12_P2.54mm_Vertical | J3 |
| 1 | SMA_LORAWAN | SMA_Amphenol_132289_EdgeMount | J4 |
| 1 | UFL_GPS | U.FL_Molex_MCRF_73412-0110_Vertical | J5 |
| 1 | V_BCKP | PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | 47n 710-7447860147G | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
Neo tracker hat design files
The KiCad project lives in the MTalon63/PCBs repository on GitHub; these links point at the commit this page was built from.
Neo tracker hat: common questions
How big is the Neo tracker hat?
The Neo tracker hat measures 40 × 40 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Neo tracker hat?
14 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Neo tracker hat design files?
From the MTalon63/PCBs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Neo tracker hat design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in PCBs
ESP32Ws2812-matrix
100 × 100 mm290 parts4LCustom license2
Bpsk modulator
66.5 × 42 mm62 parts2LCustom license2
ESP32Fan control
50 × 50 mm56 parts6LCustom license2
ESP32Esp32s3wroom devboard
29 × 46.7 mm27 parts2LCustom license2
Ublox dan usb dongle
43.5 × 22 mm26 parts6LCustom license2
Adl5606-breakout
36.6 × 13.9 mm18 parts6LCustom license2
Sx1255-breakout
31 × 30 mm17 parts6LCustom license2
Pi attenuator panel
18.2 × 5.5 mm8 parts2LCustom license2
Smd tht adapter
86.4 × 92 mm4 parts2LCustom license2
Panel
86.4 × 92 mm4 parts2LCustom license2
AT0603T-breakout panel
17.1 × 5 mm3 parts2LCustom license2
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979