Optic transceiver board-2t6r
About the Optic transceiver board-2t6r
Optic transceiver board-2t6r is an open source PCB design by mtguerreiro, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 38.8 × 63.7 mm, with 49 components from 15 distinct parts.
Other key parts include the HFBR-1521Z, HFBR-2521Z and 74HCT541. By type, the board carries 25 resistors, 13 capacitors, 9 ICs, 1 connector and 1 diode.
It belongs with the rf & radio designs in this gallery.
Main components on the Optic transceiver board-2t6r
Optic transceiver board-2t6r bill of materials (BOM)
49 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | HFBR-1521Z | HFBR-1521Z | U1, U8 |
| 6 | HFBR-2521Z | HFBR-2521Z | U2, U3, U4, U5, U6, U7 |
| 1 | 74HCT541 | TSSOP-20_4.4x6.5mm_P0.65mm | U9 |
| 1 | Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Horizontal | J1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 10 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C5, C6, C7, C8, C9 +2 |
| 3 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C10, C13 |
| 2 | 220R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R21 |
| 2 | 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R22 |
| 6 | 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R6, R9, R12, R15, R18 |
| 6 | DNP | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R7, R10, R13, R16, R19 |
| 6 | 47R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R8, R11, R14, R17, R20 |
| 1 | 0R | R_0805_2012Metric | R23 |
| 1 | DNP | R_0805_2012Metric | R24 |
| 1 | 2k | R_0805_2012Metric | R25 |
Optic transceiver board-2t6r design files
The KiCad project lives in the mtguerreiro/pcbs repository on GitHub; these links point at the commit this page was built from.
Optic transceiver board-2t6r: common questions
How big is the Optic transceiver board-2t6r?
The Optic transceiver board-2t6r measures 38.8 × 63.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Optic transceiver board-2t6r?
49 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Optic transceiver board-2t6r design files?
From the mtguerreiro/pcbs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Optic transceiver board-2t6r design in my own project?
Yes, under the terms of its BSD-3-Clause license, which mtguerreiro chose for the repository.
More boards in pcbs
Cuk iso ps
225 × 130 mm151 parts2LBSD-3-Clause0
RP2040/RP2350Pi pico itm39xxc if
116.8 × 77 mm104 parts2LBSD-3-Clause0
Amplifier board six channels
50 × 45 mm93 parts2LBSD-3-Clause0
Lem adapter board
40 × 130.5 mm67 parts2LBSD-3-Clause0
Relay pc module
75 × 75.1 mm56 parts2LBSD-3-Clause0
Adc fiber interface board six channels
38.8 × 63.7 mm49 parts2LBSD-3-Clause0
Adc board six channels
35 × 44.5 mm44 parts2LBSD-3-Clause0
Afe ep shield
65 × 60.1 mm36 parts2LBSD-3-Clause0
Digital isolator-6t2r
47.1 × 42 mm32 parts2LBSD-3-Clause0
Analog buffer six channels
32.1 × 35 mm30 parts2LBSD-3-Clause0
AVR/ArduinoPynq rpi ph adapter
167.8 × 102.7 mm9 parts2LBSD-3-Clause0
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372