Pi pico itm39xxc if
About the Pi pico itm39xxc if PCB
Pi pico itm39xxc if is an open source RP2040/RP2350 PCB design by mtguerreiro, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 116.8 × 77 mm, with 104 components from 35 distinct parts.
Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the TPS56320x, MAX3232, Opamp_Dual, LM4040DBZ-3 and MCP4922. By type, the board carries 42 resistors, 38 capacitors, 11 ICs, 8 connectors, 4 diodes and 1 inductor.
Main components on the Pi pico itm39xxc if
Pi pico itm39xxc if bill of materials (BOM)
104 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pico | RPi_Pico_SMD_TH | U1 |
| 1 | TPS56320x | SOT-23-6 | U2 |
| 1 | MAX3232 | TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 5 | Opamp_Dual | SOIC-8_3.9x4.9mm_P1.27mm | U4, U6, U8, U10, U11 |
| 1 | LM4040DBZ-3 | SOT-23 | U5 |
| 2 | MCP4922 | SOIC-14_3.9x8.7mm_P1.27mm | U7, U9 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J3, J10 |
| 1 | Conn_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | Conn_01x10 | TerminalBlock_Phoenix_MKDS-3-10-5.08_1x10_P5.08mm_Horizontal | J6 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J8, J9 |
| 3 | LED_Small_Filled | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 1 | BAT60 | D_SOD-323_HandSoldering | D4 |
| 1 | 4.7uH | L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 6 | DNP | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C9, C28, C31, C35, C38 |
| 13 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C11, C12, C17, C18, C21, C23 +5 |
| 5 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C6, C7, C8 |
| 3 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C20, C26 |
| 3 | 470nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14, C15 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C19, C24, C29, C33, C37 |
| 1 | 1nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 1 | 0R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25 |
| 3 | 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R8, R15 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 6 | DNP | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R23, R24, R25, R28, R33 |
| 3 | 47R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R11, R13 |
| 7 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R10, R16, R37, R40, R44, R47 |
| 1 | 11k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 4 | 56k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R21, R29, R34 |
| 4 | 24k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R22, R30, R35 |
| 3 | 22R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R27, R32 |
| 3 | 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R39, R45 |
| 4 | 3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R36, R41, R43, R46 |
| 2 | 20k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R38, R42 |
Pi pico itm39xxc if design files
The KiCad project lives in the mtguerreiro/pcbs repository on GitHub; these links point at the commit this page was built from.
Pi pico itm39xxc if: common questions
What microcontroller does the Pi pico itm39xxc if use?
The Pi pico itm39xxc if is built around the Pico, from the RP2040/RP2350 family.
How big is the Pi pico itm39xxc if PCB?
The Pi pico itm39xxc if measures 116.8 × 77 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pi pico itm39xxc if?
104 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pi pico itm39xxc if design files?
From the mtguerreiro/pcbs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pi pico itm39xxc if design in my own project?
Yes, under the terms of its BSD-3-Clause license, which mtguerreiro chose for the repository.
Can I test firmware for the Pi pico itm39xxc if without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in pcbs
Cuk iso ps
225 × 130 mm151 parts2LBSD-3-Clause0
Amplifier board six channels
50 × 45 mm93 parts2LBSD-3-Clause0
Lem adapter board
40 × 130.5 mm67 parts2LBSD-3-Clause0
Relay pc module
75 × 75.1 mm56 parts2LBSD-3-Clause0
Adc fiber interface board six channels
38.8 × 63.7 mm49 parts2LBSD-3-Clause0
Optic transceiver board-2t6r
38.8 × 63.7 mm49 parts2LBSD-3-Clause0
Adc board six channels
35 × 44.5 mm44 parts2LBSD-3-Clause0
Afe ep shield
65 × 60.1 mm36 parts2LBSD-3-Clause0
Digital isolator-6t2r
47.1 × 42 mm32 parts2LBSD-3-Clause0
Analog buffer six channels
32.1 × 35 mm30 parts2LBSD-3-Clause0
AVR/ArduinoPynq rpi ph adapter
167.8 × 102.7 mm9 parts2LBSD-3-Clause0
Similar boards
RP2040/RP2350Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1k
RP2040/RP2350Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Corne
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0k
RP2040/RP2350Jitx design
55.5 × 65 mm26 parts4LGPL-3.05.0k
RP2040/RP2350Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3k