Usb2lin
multilan-tarek·usb2lin
About the Usb2lin PCB
Usb2lin is an open source PCB design by multilan-tarek, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 55.3 × 70.5 mm, with 56 components from 25 distinct parts.
Other key parts include the XR21V1414IM-0B-EB, AP63203WU and TJA1021xT. By type, the board carries 20 capacitors, 14 resistors, 7 connectors, 7 diodes, 6 ICs and 1 fuse.
It belongs with the usb & debug tools designs in this gallery.
From the project
4-channel USB to LIN bridge
This is a 4-channel interface for LIN buses.\ It is using 4 NXP TJA1021 and a MaxLinear XR21V1414IM USB to UART bridge.
Tested with BMW I/K-Bus, but it should work with any LIN bus.

Main components on the Usb2lin
Usb2lin bill of materials (BOM)
56 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XR21V1414IM-0B-EB XR21V1414IM | TQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AP63203WU | TSOT-23-6 | U2 |
| 4 | TJA1021xT | SOIC-8_3.9x4.9mm_P1.27mm | U3, U4, U5, U6 |
| 1 | USB | USB_B_TE_5787834_Vertical | J1 |
| 1 | POWER | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J2 |
| 1 | POWER OUT | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J3 |
| 1 | BUS A | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J4 |
| 1 | BUS B | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J5 |
| 1 | BUS C | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J6 |
| 1 | BUS D | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J7 |
| 1 | Fuse | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | SS14 | D_SMA | D1 |
| 1 | PWR | LED_0805_2012Metric | D2 |
| 1 | SP0502BAHT | SOT-23 | D3 |
| 4 | PESD1LIN | D_SOD-323 | D4, D5, D6, D7 |
| 1 | 4.7uH | L_APV_ANR5040 | L1 |
| 3 | 100nF | C_0805_2012Metric | C1, C4, C6 |
| 3 | 22uF | C_0805_2012Metric | C2, C7, C8 |
| 2 | 10uF | C_0805_2012Metric | C3, C5 |
| 4 | 220pF | C_0805_2012Metric | C9, C10, C11, C12 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1nF | C_0805_2012Metric | C13, C14, C15, C16 |
| 4 | 68nF | C_0805_2012Metric | C17, C18, C19, C20 |
| 6 | 1K | R_0805_2012Metric | R1, R2, R11, R12, R13, R14 |
| 4 | 4.7K | R_0805_2012Metric | R3, R4, R5, R6 |
| 4 | 100R | R_0805_2012Metric | R7, R8, R9, R10 |
Usb2lin design files
The KiCad project lives in the multilan-tarek/usb2lin repository on GitHub; these links point at the commit this page was built from.
- Layoutusb2lin.kicad_pcb
- Schematicusb2lin.kicad_sch
Usb2lin: common questions
How big is the Usb2lin PCB?
The Usb2lin measures 55.3 × 70.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usb2lin?
56 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usb2lin design files?
From the multilan-tarek/usb2lin repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Usb2lin design in my own project?
Yes, under the terms of its GPL-3.0 license, which multilan-tarek chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389