ODR-1 Display Board
About the ODR-1 Display Board
ODR-1 Display Board is an open source PCB design by N7IFC, published on GitHub. It is a 2-layer board measuring 93.6 × 48.9 mm, with 14 components from 10 distinct parts.
Other key parts include the LCD__TM022HDH26. By type, the board carries 6 resistors, 2 capacitors, 1 IC, 1 transistor, 1 connector and 1 inductor.
It belongs with the rf & radio and displays & leds designs in this gallery.
From the project
Hardware files for ODR-1 Radio
This is the hardware repository for the ODR-1 (Open Design Radio - 1) which is a stand-alone "Firmware" defined QRP transceiver.The design goal for the radio is to cover from 1.8MHz (160 meters) up to 50 MHz (6 meters) though it may be able to cover up to 70MHz (4 meters).
The ODR-1 radio consists of the following circuit boards:
1) Display Board 2) Processor Board 3) Oscillator & Mixer Board 4) Amp and tuner board (not released, under design)
Main components on the ODR-1 Display Board
ODR-1 Display Board bill of materials (BOM)
14 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LCD__TM022HDH26 | TM022HDH26 | U200 |
| 1 | IRLML2060TRPBF | SOT23 | Q200 |
| 1 | CONN_8X2 | HDR_8x2 | P9 |
| 2 | PEC16-4 | ROTARY_ENCODER_1 | EN200, EN201 |
| 1 | MPZ2012S102A | SM0805-1 | FB200 |
| 1 | 22uF | SM1206-1 | C200 |
| 1 | 0.1uF | SM0805-1 | C201 |
| 4 | 4.75 | SM0805-1 | R200, R201, R202, R203 |
| 1 | 10.0 | SM0805-1 | R204 |
| 1 | 10.0K | SM0805-1 | R205 |
ODR-1 Display Board design files
The KiCad project lives in the N7IFC/ODR-1_Hardware repository on GitHub; these links point at the commit this page was built from.
ODR-1 Display Board: common questions
How big is the ODR-1 Display Board?
The ODR-1 Display Board measures 93.6 × 48.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ODR-1 Display Board?
14 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ODR-1 Display Board design files?
From the N7IFC/ODR-1_Hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ODR-1 Display Board design in my own project?
The repository has no license, so all rights stay with N7IFC. Use it as a reference, and ask the author before reusing the design.
More boards in ODR-1_Hardware
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k