HardLabs

Cs1

na103·7-drive·kicad/cs1/cs1.kicad_pcb

Cs1 PCB layout, top view — open source board by na103

About the Cs1 PCB

Cs1 is an open source PCB design by na103, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 42 × 37 mm, with 3 components from 3 distinct parts.

It belongs with the displays & leds and retro computing designs in this gallery.

From the project

Amiga 7 segment floppy drive display monitor

here you can find the mouser project with all the components, Db23 connectors excluded. https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=75b1d9bf4b

you can see here the steps to follow to build the board. gerber of the three board is inside kicad projects switch in upper position show DF0 activity, down DF1 is avaible an optional 3d printed case. thanks to Roberto Camparini for stl file

Cs1, from the project README
From the project README

Cs1 bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
DB23_Male-Connector
J1
1
DB23_Female-Connector
J2
1
Conn_01x16
J3

Cs1 design files

The KiCad project lives in the na103/7-drive repository on GitHub; these links point at the commit this page was built from.

Cs1: common questions

How big is the Cs1 PCB?

The Cs1 measures 42 × 37 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cs1?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Cs1 design files?

From the na103/7-drive repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Cs1 design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in 7-drive

Similar boards