BLDC DRIVE V1.0
NabilHassan11·BLDC_DRIVE_V1.0·BLDC_Drive/BLDC_Drive.kicad_pcb
About the BLDC DRIVE V1.0 PCB
BLDC DRIVE V1.0 is an open source PCB design by NabilHassan11, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 80 × 80 mm, with 55 components from 15 distinct parts.
Other key parts include the INA180A3. By type, the board carries 18 resistors, 17 capacitors, 9 diodes, 5 inductors, 4 connectors and 2 ICs.
It belongs with the robotics & motion designs in this gallery.
From the project
A 3-phase Brushless DC (BLDC) motor driver PCB designed in KiCad, capable of handling 12V supply voltage at 10–25A continuous phase current.
A 3-phase Brushless DC (BLDC) motor driver PCB designed in KiCad, capable of handling 12V supply voltage at 10–25A continuous phase current.
- Input Voltage: 12V - Output Current: 10–25A (per phase, depending on thermal management) - Gate Driver: IR2110 half-bridge drivers (×3 — one per phase) - Power MOSFETs: IRFZ44VZPBF N-channel MOSFETs in a 3-phase full-bridge configuration (6× total) - Current Sensing: INA180A3 rail-to-rail current sense amplifiers - Bulk Decoupling: 470µF electrolytic capacitors for supply filtering - EMI Filtering: WE-CBF 0805 ferrite beads and 100nF bypass capacitors…

Main components on the BLDC DRIVE V1.0
BLDC DRIVE V1.0 bill of materials (BOM)
55 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | INA180A3 | SOT-23-5 | U4, U6 |
| 1 | B2B-XH-A | JST_B2B-XH-A | J1 |
| 1 | B9B-XH-A | JST_B9B-XH-A | J2 |
| 1 | Screw_Terminal_01x02 | 691313510002 | J3 |
| 1 | Screw_Terminal_01x03 | 691312510003 | J4 |
| 9 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 5 | 600Ω @ 100MHz | WE-CBF_0805_W3.0 | FB1, FB2, FB3, FB4, FB5 |
| 6 | 10uF | C_0603_1608Metric | C1, C4, C6, C9, C11, C14 |
| 6 | 100nF | C_0402_1005Metric | C2, C3, C7, C8, C12, C13 |
| 3 | 1uF | C_0603_1608Metric | C5, C10, C15 |
| 2 | 470uF | CP_Radial_D16.0mm_P7.50mm | C17, C18 |
| 6 | 20 | R_1206_3216Metric | R1, R2, R5, R7, R15, R16 |
| 5 | 10 | R_1206_3216Metric | R3, R4, R10, R17, R18 |
| 6 | 10k | R_0603_1608Metric | R6, R8, R12, R13, R19, R20 |
| 1 | 5 | R_1206_3216Metric | R11 |
BLDC DRIVE V1.0 design files
The KiCad project lives in the NabilHassan11/BLDC_DRIVE_V1.0 repository on GitHub; these links point at the commit this page was built from.
BLDC DRIVE V1.0: common questions
How big is the BLDC DRIVE V1.0 PCB?
The BLDC DRIVE V1.0 measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BLDC DRIVE V1.0?
55 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the BLDC DRIVE V1.0 design files?
From the NabilHassan11/BLDC_DRIVE_V1.0 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BLDC DRIVE V1.0 design in my own project?
Yes, under the terms of its Apache-2.0 license, which NabilHassan11 chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979