Close the door analog
NadavBenda·close-the-door-analog·Kicad_design/close_door.kicad_pcb
About the Close the door analog PCB
Close the door analog is an open source PCB design by NadavBenda, published on GitHub. It is a 2-layer board measuring 97.8 × 43.2 mm, with 39 components from 20 distinct parts.
Other key parts include the SN74LVC2G02DCTR, LTC6993IS6-3#TRMPBF, SMTU2450N-LF.TR and TLC556CDR. By type, the board carries 15 capacitors, 12 resistors, 5 ICs, 2 diodes, 1 transistor and 1 speaker.
It belongs with the power & battery designs in this gallery.
From the project
A tiny fully-analog, battery-powered behavioral reminder device.
A small battery-powered analog reminder circuit for a shared-house door.
If the door is left open for more than a short delay, the circuit emits a gentle beep sequence as a reminder to close it. The design is intentionally implemented without a microcontroller, using discrete analog/timing logic.
This project started from a real everyday problem: people passing through a shared hallway door often leave it open. Instead of using a software-heavy smart-home solution, the goal was to build a small, manufacturable analog PCB and practice the full hardware design flow independently.

Main components on the Close the door analog
Close the door analog bill of materials (BOM)
39 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74LVC2G02DCTR | SOP65P400X130-8N | U1 |
| 2 | LTC6993IS6-3#TRMPBF LTC6993IS6-3 | TSOT-23-6 | U2, U3 |
| 1 | SMTU2450N-LF.TR SMTU2450N-LF | SMTU2450N1LF | U5 |
| 1 | TLC556CDR | SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | AO3400A Alpha & Omega Semicon | SOT-23 | Q1 |
| 1 | PKLCS1212E20A0-R1 | PKLCS1212E20A0-R1 | LS1 |
| 2 | 3296W-1-105LF 1meg | Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 1 | KSK-1C90F-1015 my_SW_Reed_SPDT | KSK-1C90F-1015 | SW1 |
| 2 | 1N4148W ST(Semtech) | D_SOD-123 | D1, D2 |
| 6 | 100nF YAGEO | C_0805_2012Metric | C1, C2, C4, C5, C9, C10 |
| 3 | 47uF Samsung Electro-Mechanics | C_1206_3216Metric | C3, C7, C8 |
| 2 | 10uF Samsung Electro-Mechanics | C_0805_2012Metric | C6, C13 |
| 2 | 10nF Samsung Electro-Mechanics | C_0805_2012Metric | C11, C12 |
| 2 | 330pF Samsung Electro-Mechanics | C_0603_1608Metric | C14, C16 |
| 4 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R1, R3, R5, R12 |
| 2 | 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R2, R9 |
| 1 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R4 |
| 3 | 1MΩ UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R6, R10, R15 |
| 1 | 5.1kΩ UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R7 |
| 1 | 0Ω UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R8 |
Close the door analog design files
The KiCad project lives in the NadavBenda/close-the-door-analog repository on GitHub; these links point at the commit this page was built from.
Close the door analog: common questions
How big is the Close the door analog PCB?
The Close the door analog measures 97.8 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Close the door analog?
39 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Close the door analog design files?
From the NadavBenda/close-the-door-analog repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Close the door analog design in my own project?
The repository has no license, so all rights stay with NadavBenda. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k