GBC motherboard iylia
About the GBC motherboard iylia PCB
GBC motherboard iylia is an open source Raspberry Pi PCB design by NajidPI, published on GitHub. It is a 2-layer board measuring 70.3 × 122.4 mm, with 17 components from 17 distinct parts.
Its main chip is the raspberry_pi_zero_v2, from the Raspberry Pi family. Other key parts include the USB_micro_B_type_jack, 1P4T_switch, adafruit_powerboost_1000C, GBC_controller_board and Adafruit_2_4_in_TFT_Breakout_v2. By type, the board carries 10 ICs, 2 capacitors, 2 resistors and 1 speaker.
It belongs with the retro computing designs in this gallery.
From the project
Retrofitting the Gameboy Colour with a Raspberry Pi | Sibling project to entice nostalgia
install - To start designing from scratch. These are the necessary versions for running KiCAD with Autorouter
GBC_motherboard - Files for a PCB design made in KiCAD and generated gerber files for printing
gbc - holds all games loaded on the raspberry pi
GameBoyZero - File to program Teensy board for gaming controls
Future works: Merge all breakout boards onto motherboard
Main components on the GBC motherboard iylia
GBC motherboard iylia bill of materials (BOM)
17 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB_micro_B_type_jack | USB_micro_B_type_jack | U2 |
| 1 | 1P4T_switch | 1P4T_switch | U3 |
| 1 | adafruit_powerboost_1000C | adafruit_powerboost_1000c | U4 |
| 1 | GBC_controller_board | GBC_controller_board | U5 |
| 1 | Adafruit_2_4_in_TFT_Breakout_v2 | Adafruit_2_4_in_TFT_Breakout_v2 | U6 |
| 1 | raspberry_pi_zero_v2 | raspberry_pi_zero_v2 | U7 |
| 1 | thin_micro_potentiometer | thin_micro_potentiometer | U8 |
| 1 | Adafruit_PAM8302 | Adafruit_PAM8302 | U9 |
| 1 | audio_jack | audio_jack | U10 |
| 1 | teensy-LC_v2 | teensy-LC_v2 | U11 |
| 1 | LOGO | cute-duck | G1 |
| 1 | LOGO | pikachu | G2 |
| 1 | Speaker | PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | 33N | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 10U | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | R270R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 150R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
GBC motherboard iylia design files
The KiCad project lives in the NajidPI/GBC_RPi repository on GitHub; these links point at the commit this page was built from.
GBC motherboard iylia: common questions
What microcontroller does the GBC motherboard iylia use?
The GBC motherboard iylia is built around the raspberry_pi_zero_v2, from the Raspberry Pi family.
How big is the GBC motherboard iylia PCB?
The GBC motherboard iylia measures 70.3 × 122.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GBC motherboard iylia?
17 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the GBC motherboard iylia design files?
From the NajidPI/GBC_RPi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the GBC motherboard iylia design in my own project?
The repository has no license, so all rights stay with NajidPI. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the GBC motherboard iylia without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in GBC_RPi
Similar boards
Raspberry PiOpen source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7k
Raspberry PiIot
dotnet
56 × 65 mm24 parts2LMIT2.4k
Raspberry PiSPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3k
Raspberry PiCM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0k
Raspberry PiHaxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license672
Raspberry PiPhased
Neumi
75 × 100 mm71 parts2LNo license507