Logic v final1

nassim78belabed-gif·ipod-ok-computer·hardware/pcb_v_final1/logic/kicad/logic_v_final1.kicad_pcb

Logic v final1 PCB layout, top view — open source ESP32 board by nassim78belabed-gif

About the Logic v final1 PCB

Logic v final1 is an open source ESP32 PCB design by nassim78belabed-gif, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 76.9 × 94.7 mm, with 8 components from 8 distinct parts.

Its main chip is the ESP32-S3 J1 (gauche), from the ESP32 family. By type, the board carries 6 connectors and 2 capacitors.

It belongs with the audio, iot & wireless and power & battery designs in this gallery.

From the project

Lecteur MP3 façon iPod Classic sur ESP32-S3 : firmware, PCB KiCad et boîtier 3D

Un iPod Classic refait de zéro : lecteur MP3 sur carte SD, écran couleur 2,4", DAC I2S et 6 boutons, pour environ 33 € de composants. Firmware, PCB (2 cartes) et boîtier 3D sont conçus de bout en bout, de la lecture des tags ID3 au transfert de musique par WiFi.

- Firmware en C++ (Arduino / ESP32) : navigation Artistes / Albums / Morceaux, lecture MP3 en I2S, pochettes, lecture des tags ID3. - Transfert de musique par WiFi depuis un téléphone ou un PC, avec rangement automatique d'après les tags. - PCB en deux cartes, générées par script, avec leurs fichiers de fabrication. - Boîtier en deux…

Logic v final1, from the project README
From the project README

Logic v final1 bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3 J1 (gauche)
J1
1
ESP32-S3 J3 (droite)
J3
1
VERS ECRAN: VCC GND CS RST DC MOSI SCK LED
J4
1
VERS SD ecran
J5
1
PCM5102A: SCK BCK DIN LCK GND VIN
J6
1
VERS FACADE: MENU PLAY PREV NEXT VOL+ VOL- GND
J7
1
10uF
C3
1
100nF
C4

Logic v final1 design files

The KiCad project lives in the nassim78belabed-gif/ipod-ok-computer repository on GitHub; these links point at the commit this page was built from.

Logic v final1: common questions

What microcontroller does the Logic v final1 use?

The Logic v final1 is built around the ESP32-S3 J1 (gauche), from the ESP32 family.

How big is the Logic v final1 PCB?

The Logic v final1 measures 76.9 × 94.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Logic v final1?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Logic v final1 design files?

From the nassim78belabed-gif/ipod-ok-computer repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Logic v final1 design in my own project?

Yes, under the terms of its GPL-3.0 license, which nassim78belabed-gif chose for the repository.

Can I test firmware for the Logic v final1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ipod-ok-computer

Similar boards