Nfc card

nastea1·nfc_card·hardware/Business Card v2.kicad_pcb

Nfc card PCB layout, top view — open source AVR/Arduino board by nastea1

About the Nfc card PCB

Nfc card is an open source AVR/Arduino PCB design by nastea1, published on GitHub under the Custom license license. It is a 2-layer board measuring 85.5 × 54.1 mm, with 39 components from 15 distinct parts.

Its main chip is the ATTINY816-MNR, from the AVR/Arduino family. Other key parts include the NT3H2111W0FHKH. By type, the board carries 21 LEDs, 8 resistors, 4 capacitors, 2 ICs, 1 transistor and 1 connector.

From the project

My working copy of WiHarper/nfc_card (NFC energy-harvesting PCB business card; GPL-3.0 software / CERN-OHL-S-v2 hardware)

Like most business cards, this one doesn’t have a battery. When it’s tapped against a phone, though, 21 LEDs start an animation, powered just by NFC.

MCU: ATtiny816 NFC Chip: NXP NTAG I2C Plus Antenna: Custom rectangular coil tuned to ~2.75 µH Display: 21 Charlieplexed LEDs * Dimensions: Payment card form factor

hardware/ - KiCad 9.0 schematic files/PCB layout files and 3D models software/ - firmware and KiPython script gallery/` - photos/video of card

Nfc card, from the project README
From the project README

Main components on the Nfc card

Nfc card bill of materials (BOM)

39 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY816-MNR
Microchip Tech
U1
1
NT3H2111W0FHKH
NXP Semicon
U3
1
DMP21D0UFB4-P
TECH PUBLIC
Q1
1
Conn_01x03_Pin
J1
1
Antenna_Loop
AE1
20
XL-1608UYC-06FJ
XINGLIGHT
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +12
1
XL-1608UYC-06FJ
XINGLIGHT
LED22
1
TPESD8LS5_0CT5G
TECH PUBLIC
D1
1
1.5P
1.5p
C1
2
100N
100n
C2, C4
1
10U
10u
C3
5
100
R1, R4, R5, R6, R7
1
100K
100k
R2
1
2.2K
2.2k
R3
1
220
R8

Nfc card design files

The KiCad project lives in the nastea1/nfc_card repository on GitHub; these links point at the commit this page was built from.

Nfc card: common questions

What microcontroller does the Nfc card use?

The Nfc card is built around the ATTINY816-MNR, from the AVR/Arduino family.

How big is the Nfc card PCB?

The Nfc card measures 85.5 × 54.1 mm, has 2 copper layers and is 0.79 mm thick.

How many components are on the Nfc card?

39 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Nfc card design files?

From the nastea1/nfc_card repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Nfc card design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Nfc card without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards