2 open source boards using the ATTINY816-MNR
Real designs built with the ATTINY816-MNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Nfc card
nastea1
85.5 × 54.1 mm39 parts2LCustom license0AVR/Arduino
Falconia-Beacon
PHS-SMCS
23 × 31 mm9 parts2LNo license0
The ATTINY816-MNR in open source designs
The gallery holds 2 open source boards using the ATTINY816-MNR from 2 GitHub repositories; a typical one measures about 54.2 × 42.5 mm and carries around 24 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Nfc card by nastea1.
Microcontrollers on boards using the ATTINY816-MNR
ATTINY816-MNR: common questions
Where can I find a ATTINY816-MNR reference design?
Each of the 2 boards on this page is a real design using the ATTINY816-MNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATTINY816-MNR use?
Most are built on AVR/Arduino (2).
How big is a typical board using the ATTINY816-MNR?
The median is 54.2 × 42.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATTINY816-MNR?
By GitHub stars, Nfc card by nastea1, with 0 stars.
Can I simulate one of these boards using the ATTINY816-MNR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.