JamDigital-Custom
natael221·JamDigital-CustomPCB
About the JamDigital-Custom PCB
JamDigital-Custom is an open source ESP32 PCB design by natael221, published on GitHub. It is a 2-layer board measuring 63.4 × 64.4 mm, with 8 components from 8 distinct parts.
Its main chip is the ESP32_NODEMCU, from the ESP32 family. By type, the board carries 1 connector and 1 speaker.
It belongs with the iot & wireless, sensors and audio designs in this gallery.
From the project
This system goes beyond a simple clock. It acts as a real-time information hub displaying time, date, temperature, humidity, and dynamic motivational quotes on a P10 LED Panel.
This system goes beyond a simple clock. It acts as a real-time information hub displaying time, date, temperature, humidity, and dynamic motivational quotes on a P10 LED Panel.
To make it fully autonomous, it features automatic Adzan audio playback triggered at specific times via a DFPlayer Mini, all manageable through a Wi-Fi-based web interface 🌐.
🕐 Precision Timekeeping: Driven by the highly accurate DS3231 RTC module. 🌡️ Environment Monitoring: Real-time data processing from the DHT22 sensor. 🔊 Automated Audio: DFPlayer Mini seamlessly plays MP3 files from an SD card. 💬 Dynamic Quotes…

JamDigital-Custom bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HUB12 | PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | Arduino_Nano_v2.x | Arduino_Nano | ArduinoNano1 |
| 1 | DFPLAYER_MINI | DFPlayer_V2 | DFPLAYERMINI1 |
| 1 | DHT22 | DHT11_Temperature_Humidity | DHT22 |
| 1 | DS3231 | MODULE_TC00500 | DS3231 |
| 1 | Speaker | JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | LS1 |
| 1 | ESP32_NODEMCU | MODULE_ESP32_NODEMCU | NodeMCU_ESP32 |
| 1 | POWER | TerminalBlock_Dinkle_DT-55-B01X-02_P10.00mm | POWER1 |
JamDigital-Custom design files
The KiCad project lives in the natael221/JamDigital-CustomPCB repository on GitHub; these links point at the commit this page was built from.
- Layoutcobabelajarlagi.kicad_pcb
- Schematiccobabelajarlagi.kicad_sch
JamDigital-Custom: common questions
What microcontroller does the JamDigital-Custom use?
The JamDigital-Custom is built around the ESP32_NODEMCU, from the ESP32 family.
How big is the JamDigital-Custom PCB?
The JamDigital-Custom measures 63.4 × 64.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the JamDigital-Custom?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the JamDigital-Custom design files?
From the natael221/JamDigital-CustomPCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the JamDigital-Custom design in my own project?
The repository has no license, so all rights stay with natael221. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the JamDigital-Custom without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k