Nate keeb
natehui0·nate-keeb·Keyboard_final/Keyboard_final/keyboard.kicad_pcb
About the Nate keeb PCB
Nate keeb is an open source RP2040/RP2350 PCB design by natehui0, published on GitHub. It is a 2-layer board measuring 338.3 × 127.2 mm, with 169 components from 5 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 86 switches, 82 diodes and 1 module.
It belongs with the keyboards designs in this gallery.
From the project
A custom mechanical keyboard designed and built from scratch using KiCad and Onshape.
A custom mechanical keyboard designed and built from scratch using KiCad and Onshape. This project started as a way for me to learn more about PCB design, electronics, CAD, and mechanical keyboards, while pursuing my interest in keyboards.

Main components on the Nate keeb
Nate keeb bill of materials (BOM)
169 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_THT | A1 |
| 3 | MX_stab | STAB_MX_P_2u | S1, S2, S4 |
| 1 | MX_stab | STAB_MX_P_6.25u | S3 |
| 82 | SW_Push | SW_MX_1u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +74 |
| 82 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +74 |
Nate keeb design files
The KiCad project lives in the natehui0/nate-keeb repository on GitHub; these links point at the commit this page was built from.
Nate keeb: common questions
What microcontroller does the Nate keeb use?
The Nate keeb is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the Nate keeb PCB?
The Nate keeb measures 338.3 × 127.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nate keeb?
169 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nate keeb design files?
From the natehui0/nate-keeb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nate keeb design in my own project?
The repository has no license, so all rights stay with natehui0. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Nate keeb without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k