HardLabs

Pineappley-Player

nathans-systems·Pineappley-Player·PCB/MP3 Player.kicad_pcb

Pineappley-Player PCB layout, top view — open source ESP32 board by nathans-systems

About the Pineappley-Player PCB

Pineappley-Player is an open source ESP32 PCB design by nathans-systems, published on GitHub. It is a 2-layer board measuring 100 × 56.4 mm, with 13 components from 11 distinct parts.

Its main chip is the ESP32S3 MINI, from the ESP32 family. By type, the board carries 8 ICs, 2 capacitors, 2 resistors and 1 switch.

It belongs with the audio, iot & wireless and power & battery designs in this gallery.

From the project

My Open-Source, Custom built MP3 Player.

Pineappley-Player, from the project README
From the project README

Pineappley-Player bill of materials (BOM)

13 components, 11 distinct parts.

QtyPartRefs
1
~
U1
1
~
U2
1
~
U3
1
~
U4
1
~
U5
1
~
U6
1
~
U7
1
~
U8
1
RotaryEncoder_Switch
SW1
2
100nF
C1, C2
2
10K
R1, R2

Pineappley-Player design files

The KiCad project lives in the nathans-systems/Pineappley-Player repository on GitHub; these links point at the commit this page was built from.

Pineappley-Player: common questions

What microcontroller does the Pineappley-Player use?

The Pineappley-Player is built around the ESP32S3 MINI, from the ESP32 family.

How big is the Pineappley-Player PCB?

The Pineappley-Player measures 100 × 56.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pineappley-Player?

13 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pineappley-Player design files?

From the nathans-systems/Pineappley-Player repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pineappley-Player design in my own project?

The repository has no license, so all rights stay with nathans-systems. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pineappley-Player without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards