HardLabs

MAX1032

NathanTruong0930·COATL-AIRCRAFT·KiCAD/MAX1032-THT/MAX1032.kicad_pcb

MAX1032 PCB layout, top view — open source ESP32 board by NathanTruong0930

About the MAX1032 PCB

MAX1032 is an open source ESP32 PCB design by NathanTruong0930, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 24.6 × 16.3 mm, with 7 components from 6 distinct parts.

Its main chip is the HEADER-1X3, from the ESP32 family. Other key parts include the MAX1032BEUG_. By type, the board carries 4 capacitors, 2 jumpers and 1 IC.

It belongs with the iot & wireless designs in this gallery.

From the project

This repository contains code and resources for the Electrostatic Dust Analyzer project developed as part of the PSU Capstone program. This project utilizes a QT PY ESP32 Development Board to interpret current measurements taken from dust particles for use in determining air cond

This repository contains code and resources for the Electrostatic Dust Analyzer project developed as part of the PSU Capstone program. This project utilizes a QT PY ESP32 Development Board to interpret current measurements taken from dust particles for use in determining air conditions.

1. Real-Time Detection of Charged Particles

Detects volcanic ash, mineral dust, and wildfire smoke using induced charge measurements.

Main components on the MAX1032

MAX1032BEUG_

MAX1032 bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
MAX1032BEUG_
U1
1
HEADER-1X3
JP1
1
HEADER-1X6
JP2
2
0.1uF
C1, C3
1
1uF
C2
1
10uF
C4

MAX1032 design files

The KiCad project lives in the NathanTruong0930/COATL-AIRCRAFT repository on GitHub; these links point at the commit this page was built from.

MAX1032: common questions

What microcontroller does the MAX1032 use?

The MAX1032 is built around the HEADER-1X3, from the ESP32 family.

How big is the MAX1032 PCB?

The MAX1032 measures 24.6 × 16.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MAX1032?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the MAX1032 design files?

From the NathanTruong0930/COATL-AIRCRAFT repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MAX1032 design in my own project?

Yes, under the terms of its GPL-3.0 license, which NathanTruong0930 chose for the repository.

Can I test firmware for the MAX1032 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in COATL-AIRCRAFT

Similar boards