Chill vandu-BadUSB-
naveenkumar-sudoai·Chill_vandu-BadUSB-·kicad_design/chill_vandu/chill_vandu.kicad_sch
About the Chill vandu-BadUSB- PCB
Chill vandu-BadUSB- is an open source RP2040/RP2350 PCB design by naveenkumar-sudoai, published on GitHub. It is a board, with 69 components from 18 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the LW5433A23E and W25Q128JVSIQ. By type, the board carries 34 capacitors, 20 resistors, 5 switches, 3 ICs, 3 LEDs and 1 crystal.
From the project
its a Cheap Alternative to BADUSB rubby ducky with same functionality if not more
A custom RP2040-based USB interface board designed in KiCad. This board is tailored for JLCPCB SMT assembly and features USB-C, a microSD card slot (4-bit SDIO), 3 mode buttons, 3 status LEDs, and 16 MB QSPI flash.
Main components on the Chill vandu-BadUSB-
Chill vandu-BadUSB- bill of materials (BOM)
69 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 Raspberry Pi(树莓派) | LQFN-56_L7.0-W7.0-P0.4-EP | U1 |
| 1 | LW5433A23E Lewa Micro(乐瓦微电子) | SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR | U2 |
| 1 | W25Q128JVSIQ W25Q128JVSIQTR Winbond(华邦) | SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL | U3 |
| 1 | X322512MSB4SI YXC(扬兴晶振) | CRYSTAL-SMD_4P-L3.2-W2.5-BL | X1 |
| 1 | TF PUSH SHOU HAN(首韩) | TF-SMD_TF-PUSH | Card1 |
| 5 | TS-1187A-B-A-B XKB Connection(中国星坤) | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1, SW2, SW3, SW4, SW5 |
| 1 | TYPE-C-31-M-12 韩国韩荣 | USB-C_SMD-TYPE-C-31-M-12_1 | USBC1 |
| 1 | KT-0603R KENTO | LED-SMD_L1.6-W0.8-R-RD | LED1 |
| 1 | KT-0805G 0805G KENTO | LED0805-R-RD | LED2 |
| 1 | Blue light 0603 KENTO | LED0603-RD | LED3 |
| 1 | USBLC6-2SC6 ST(意法半导体) | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | D1 |
| 11 | 100nF | C1, C3, C26, C27, C28, C29, C30, C31 +3 | |
| 1 | 10uF | C2 | |
| 4 | 1uF | C4, C5, C6, C25 | |
| 18 | C | C7, C8, C9, C10, C11, C12, C13, C14 +10 | |
| 2 | 5.1kΩ | R1, R2 | |
| 2 | 27Ω | R3, R4 | |
| 16 | R | R5, R6, R7, R8, R9, R10, R11, R12 +8 |
Chill vandu-BadUSB- design files
The KiCad project lives in the naveenkumar-sudoai/Chill_vandu-BadUSB- repository on GitHub; these links point at the commit this page was built from.
Chill vandu-BadUSB-: common questions
What microcontroller does the Chill vandu-BadUSB- use?
The Chill vandu-BadUSB- is built around the RP2040, from the RP2040/RP2350 family.
How many components are on the Chill vandu-BadUSB-?
69 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Chill vandu-BadUSB- design files?
From the naveenkumar-sudoai/Chill_vandu-BadUSB- repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Chill vandu-BadUSB- design in my own project?
The repository has no license, so all rights stay with naveenkumar-sudoai. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Chill vandu-BadUSB- without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k