Console
About the Console PCB
Console is an open source PCB design by nbxmike, published on GitHub. It is a 2-layer board measuring 89 × 49 mm, with 39 components from 14 distinct parts.
Other key parts include the DC-DC-5SIP and CY8C54LP. By type, the board carries 20 capacitors, 7 resistors, 6 connectors, 2 ICs and 1 diode.
It belongs with the robotics & motion designs in this gallery.
From the project
PSOC 5LP based HID targeting robot operator's consoles using the CY8CKIT-059
This is an expansion of the operator console for FIRST Robotic Competitions originally published on the Cypress Semiconductor website: https://community.cypress.com/thread/30090 based on the CY8CKIT-059 development board. I had previously released hardware to ease the creation of the console, publised on the Cypress website: https://community.cypress.com/thread/30074
Main components on the Console
Console bill of materials (BOM)
39 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DC-DC-5SIP | DC-Custom5 | U1 |
| 1 | CY8C54LP | QFP_100 | U2 |
| 1 | USB-MICROB | Micro_usb_b | J1 |
| 5 | CONN_2x10 | CONN_2_10 | P1, P2, P3, P4, P5 |
| 1 | CONN_5 | HEADER_1x05 | KP1 |
| 2 | CONN_PS1 | PS1-Ctrlr | PS1, PS2 |
| 1 | MBR0520L | D_SOD-123 | D1 |
| 13 | 0.1uF | c_0603 | C1, C2, C3, C6, C7, C9, C10, C12 +5 |
| 2 | C | c_1210 | C4, C5 |
| 5 | 1.0uF | c_0603 | C8, C11, C13, C19, C20 |
| 1 | 0 | JUMPER-SHORT | R1 |
| 3 | NP | JUMPER-OPEN | R2, R3, R5 |
| 1 | 4.7K | r_0603 | R4 |
| 2 | 22 | r_0603 | R6, R7 |
Console design files
The KiCad project lives in the nbxmike/PSOC-Console repository on GitHub; these links point at the commit this page was built from.
Console: common questions
How big is the Console PCB?
The Console measures 89 × 49 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Console?
39 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Console design files?
From the nbxmike/PSOC-Console repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Console design in my own project?
The repository has no license, so all rights stay with nbxmike. Use it as a reference, and ask the author before reusing the design.
More boards in PSOC-Console
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979